Specifications BC340FW BC430DWM/ BC431DWM BC430FWM/ BC431FWM BC530DWM/ BC531DWM BC530FWM/ BC531FWM Weight (kg) 7.5 8.2 9.0 External dimensions {L x W x H : mm) 1 790 x 640 x 450 1875 x 625 x 450 Rotational direction of the cutter blade. Counter-clockwise Standard cutter 255 mm Eddy-saw blade Engine: Model G3K-F G4K-D G4K-F G5K-D G5D-F Type 2-stroke air cooled gasoline engine Displacement (cc) 33f6 41.5 52.5 Fuel tank capacity (£) 0.8 1.0 Fuel 2 cycle oil

Gesichtsschutz und verwenden Sie Ohrenschützer. 4. Tragen Sie keine leichte Kleidung, Schmuck, kurze Hosen, Sandalen und gehen Sie auch nicht barfuß. Tragen Sie nichts, das in Ästen oder einem sich beweglichen Geräteteil hängenbleiben kann. Binden Sie Ihre Haare so zusammen, daß sie höchstens schulterlang sind. 5.Starten und betreiben Sie den Motor niemals in geschlossenen Räumen. Die Abgase enthalten giftiges Kohlenmonoxid. 6.Vor dem Starten des Motors prüfen Sie den Motor auf lockere Befest

[It is possible that some specific parts may be subject to change of their delivery term and list price within the limit of seven (7) years after the machine is discontinued. It is also possible that some parts may be available even after the limit of seven (7) years.] APPLICABLE SERIAL NUMBERS : Mar. 2006 G3200 : 600001 and up G3200EZ : 632994 and up .27 . G3200 14. Parts list Fig.1 POWER UNIT (S/N 600001 and up) G3200 Fig.1 POWER UNIT (S/N 600001 and up) Key# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1

And it is also possible that some parts may be available even after the limit of ten (10) years.] BC430WE BC430WE Fig.1 CUTTER GROUP BC430WE Fig.1 CUTTER GROUP Q'TY Key# PART NUMBER DESCRIPTION NOTE /UNIT 1 3540-11102 HOUSING COMP 1 2 3540-11112 • HOUSING 1 3 3144-11150 • SEAL 1 4 00263-20610 • SCREW 1 5 3540-11311 DRUM 1 6 06004-06202 BEARING 1 7 04065-03515 RING 1 8 04064-01510 RING 1 9 3540-11410 SPACER 1 10 6340-12101 PIPE COMP 1 11 3260-11410 • RING 1 12 6340-12210 SHAFT 1 13 5766-13000 GEA

j 6. Störu ngssuche Störung Mögliche Ursache Behebung Motor startet nicht. • Steht der Schalter auf ON? • Auf ON stellen. • Wird der richtige Kraftstoff verwendet? • Auswechseln. • Hat der Motor zuviel Kraftstoff aufgenommen? • Den Chokehebel ganz öffnen und den Anrießstarter mehrmals ziehen. • Ist der Auspuff verstopft? • Reinigen. Zu geringe Abgabeleistung. • Wird der richtige Kraftstoff verwendet? • Auswechseln. • Sind die Zylinderrippen durch Schmutz verstopft? • Reinigen. Unnor

¦ WARNINGS IN THE MANUAL WARNING This mark indicates instructions which must be followed in order to prevent accidents which could lead to serious bodily injury or death. IMPORTANT This mark indicates instructions which must be followed, or it leads to mechanical failure, breakdown, or damage. NOTE This mark indicates hints or directions useful in the use of the product. SECURITE Les instructions contenues dans les mises en garde de ce mode d’emploi portant le symbole concernent les points criti

G B Check for cracks and for excessive wear interfering with the chain drive. If the wear is considerable, replace it with new one. Never fit a new chain on a worn sprocket, or a worn chain on a new sprocket. 8. Maintenance of Saw Chain and Guide Bar ¦ Saw Chain Place the file on the cutter and push straight forward. Keep the file position as illustrated. It is very important for smooth and safe operation to always keep the cutters sharp. The cutters need to be sharpened when: • Sawdust becomes

4 Specifications ................................................. 4 Warning labels on the machine...................... 5 Symbols on the machine ................................ 5 For safe operation........................................... 6 Set up............................................................. 9 Fuel............................................................... 10 Operation...................................................... 11 Maintenance............................

(1) (2) (3) (1) muffler guard (2) guide bar (3) saw chain G2500 / G2500 OPS WORKING WITH TREE SERVICE CHAIN-SAWS FROM A ROPE AND HARNESS This chapter sets out working practices to reduce the risk of injury from tree service chainsaws when working at height from a rope and harness. While it may form the basis of guidance and training literature, it should not be regarded as a substitute for formal training. General requirements working at height Operators of tree service chainsaws working at heig