Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
4 Specifications ................................................. 4 Warning labels on the machine...................... 5 Symbols on the machine ................................ 5 For safe operation........................................... 6 Set up............................................................. 9 Fuel............................................................... 10 Operation...................................................... 11 Maintenance................................................. 13 Storage......................................................... 15 Troubleshooting guide.................................. 16 G B 1. Parts location (1) Primer pump (2) Air cleaner cover (3) Choke lever (4) Fuel tank (5) Starter knob (6) Blade (7) Gear case (8) Debris guard (9) Loop handle 10) Drive shaft housing 11) Sholder strap hanger 12) Throttle lever 13) Ignition switch 14) Throttle cable 15) Protector 16) Handle BC2603DL 5 5 6 GB-3 2. Specification BC2603DL / BC2603DW Overall size (L X W X H) ............................ 1800 x 395 x 315 / 1800 x 610 x 520 mm Dry weight.................................................................................................. 5.3 / 6.7 kg Engine Model ............................................................................................... Zenoah G26L Displacement........................................................................................... 25.4 cm3 Fuel............................................................................ Mixture (Gasoline 50 : Oil 1) Carburetor .................................................................................... Diaphragm type Ignition system...........................................Transistor controlled flywheel magneto Spark plug........................................................................................NGK BPMR7A Fuel tank capacity............................................................................................... 0.75 L Starter......................................................................................................Recoil starter Clutch.................................................................................................. Centrifugal type Reduction ratio.................................................................................................... 1.357 Cutting head rotating direction............................. Counter-clockwise (Operator view) Specifications are subject to change without notice. 3. Warning labels on the machine If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s). Never modify your machine. We won't warrant the machine, if you use the remodeled brushcutter or if you don't observe the proper usage written in the manual. 4. Symbols on the machine For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake. The port to refuel the "MIX GASOLINE" Position: FUEL TANK CAP The direction to close the choke Position: AIR CLEANER COVER The direction to open the choke Position: AIR CLEANER COVER GB-4 A 5. For safe operation 1. Read this manual carefully until you completely understand and follow all safety and operating instructions. 2. Keep this manual handy so that you may refer to it later whenever any questions arise. Also note, if you have any questions which cannot be answered herein, contact the dealer from whom you purchased the product. 3. Always be sure to include this manual when selling, lending, or otherwise transferring the ownership of this product. 4. Never allow children or anyone unable to fully understand the directions given in the manual to use the machine. WORKING CONDITION 1. When using the product, you should wear proper clothing and protective equipment. (1) Helmet (2) Ear protectors (3) Protection goggles or face protector (4) Thick work gloves (5) Non-slip-sole work boots 2. And you should carry with you. (1) Attached tools (2) Properly reserved fuel (3) Spare blade (4) Things to notify your working area (rope, warning signs) (5) Whistle (for collaboration or emergency) (6) Hatchet or saw (for removal of obstacles) 3. Do not wear loose clothing, jewelry, short trousers, sandals, or go barefoot. Do not wear anything which might be caught by a moving part of the unit. Secure hair so it is above shoulder length. WORKING CIRCUMSTANCE 1. Never start the engine inside a closed room or building. Exhaust gases contain dangerous carbon monoxide. 2. Never use the product, a. when the ground is slippery or when you can't maintain a steady posture. b. At night, at times of heavy fog, or at any other times when your field of vision might be limited and it would be difficult to gain a clear view of t...
Dieses Handbuch ist für folgende Modelle:Gartengeräte - BC2603DL (655.63 kb)