Contents Contents 1 Introduction....................................................................................................................................................3 2 Target Audience............................................................................................................................................. 4 3 Target Hardware............................................................................................................................................

This allows products without built- in Bluetooth to connect to wireless headphones and speakers. Connecting to wireless speakers or headphones Screw the supplied helicoil antenna clockwise onto the base. The first time the audio adaptor is turned on it will automatically start searching for Bluetooth headphones, speakers or other A2DP sinks in range. When it finds one, it will try to pair with the device using a fixed PIN code stored in Flash memory ( as shipped, the PIN code is 8888). If the pa

If the audio mutes after 5 minutes, please contact your CSR sales channel to obtain a valid CVC security key. CS- 110826-UGP1 © CSR plc 2006 Page 1 Step 1: Setting Up the Demonstrator board 1. Choose between the on-board antenna (“ ANT” ) or the SMA RF connector (“ CON”) using this slide switch. Set to “ANT” for normal operation. 2. Connect the Lithium/Ion polymer battery here. 3. Set this switch to “ MIC” to use the microphone on the supplied headphones. 3. Set this switch to “ AMP” 4. CSR reco

Supply of this product does not convey a license under the relevant intellectual property of Thomson and/or Fraunhofer Gesellschaft nor imply any right to use this product in any finished end user or ready-to-use final product. An independent license for such use is required. For details, please visit Note: Once the MP3 add-on has been installed the av_headset_hfp.xiw will not download without the mp3_decoder.xiw having been built. Step 1: Installing the MP3 add-on Having installed BlueLab v3.2,