Black level setting : brightness White level setting : contrast The same absolute black and white level for the three colors allows the same reference for Brightness and Contrast control of the picture ! These two references also set the range in which the ADC will work for that particular source (this explains also why each input balance setting is linked to a particular source and thus saved in the image file). R59770021 CLM R10+ 11/10/2010 9.Imagemenu 9.3.9.2 Adjusting the input balance How c

R5976584 BARCO CINE7 26022003 6. Main Menu How to add a name? 1. Push the cursor key ^ or v to select the Format to which a name has to be added. (menu 6-18) 2. Press TEXT to display the compose menu. (menu 6-19) 3. The position of the character which will be edited, will be indicated with a digit. Push the cursor keys ^, v, < or > to select the first character. 4. Press ENTER to select the chosen character. This character will be inserted on the indicated position. The edit character indication

All rights are reserved. Nor this document, nor any part of it, may be reproduced or copied in any form or by any means - graphical, electronic, or mechanical including photocopying, taping or information storage and retrieval systems - without written permission of Barco © 2008 Barco N.V. All rights reserved. Nio® medical display systems (This page intentionally left blank.) Nio® medical display systems Table of Contents Table of Contents Preface.................................................

SNMP services .................................................................................................... 171 B.1 SNMP installation...................................................................................................................171 B.2 SNMP integration...................................................................................................................171 C. Troubleshooting ...................................................................................

Press ADJ or ENTER to start up the Main menu. (menu 9-1) 2. Push the cursor key ^ or v to select Installation. 3. Press ENTER to select. The Installation menu will be displayed. (menu 9-2) Main Menu Image settings Advanced settings Installation Service 1. PC 2. RGB/Component 3. DVI 4. SVideo * 5. Video 6. Component Shutdown Back Menu9-1 Input Slots Installation Input slots File service Internal pattern When no signal Source transition OSD configuration Language V-Keystone H-Keystone Global keyst

WARNING: Power down the projector and remove the power cord form the wall outlet before removing any of the projector covers. WARNING:Theprojectormustbecooleddownbefore removinganyofthe projectorcovers: waitforthe cool down cycle to finish after switching the projector to standby (the sound of the fans comes to a very low level) and wait for 15 more minutes before starting any of the procedures below. CAUTION: Wear a wrist band which is connected to the ground while handling the electrostatic di

Nor this document, nor any part of it, may be reproduced or copied in any form or by any means - graphical, electronic, or mechanical including photocopying, taping or information storage and retrieval systems - without written permission of Barco © 2010 Barco N.V. All rights reserved. Table of Contents Table of Contents Preface ................................................................................................. 5 Environmental information............................................

Press again to release the Freeze function. ZOOM W/T buttons To adjust the size of the image. Press the ZOOM T button to enlarge the image. Press the ZOOM W button to widen the area to be captured. • These buttons are also used for menu operations from the operation panel. FOCUS 8 / 9 buttons Press to focus on the document. For automatic focusing, press both buttons simultaneously. • These buttons are also used for menu operations from the operation panel. MENU button Press to turn the menu disp

Is the contrast level properly adjusted? . Adjust accordingly using AContrastB of the Image menu. APage 32 . Are the signals of the connected devices possible input signals? . Check to ensure that they are possible input signals, and input compatible signals accordingly. APage 18, 20 . Is the input cable correctly connected? . Connect the input cable correctly. APage 19, 21 Projection position on the screen has shifted . Has the setup position of the projector been shifted? . Check the setup pos

Sharp edged or hard articles are prohibited. The gathering of dew in the panel may occur with abrupt temperature or humidity changes. A stable environment condition is recommended. Keep the surface clean. No adhesives should be applied. Avoid high voltage and static charge. Wall mounting You can mount the panel to the wall instead of to the foot, by means of the supplied mounting plate. If you do not need to mount the panel to the wall, please skip this item. Step 1: Remove the panel from the fo