Login:
Sortierung : Dateiname ↑   heruntergeladen   Bewertung   Dateigröße ↑  

Omega Engineering SOLID STATE RELAYS SBG22445

heruntergeladen wurde: 11Dateigröße: 104 kb    Hersteller: Omega Engineering  
Kategorie: Pumps

UNPACKING Remove the Packing List and verify that you have received all equipment. If you have any questions about the shipment, please call the OMEGA Customer Service Department at 1-800-622-2378 or (203) 359-1660. When you receive the shipment, inspect the container and equipment for any signs of damage. Note any evidence of rough handling in transit. Immediately report any damage to the shipping agent. NOTE The carrier will not honor any claims unless all shipping material is saved for their

Omega Engineering DPG1100ADBL

heruntergeladen wurde: 9Dateigröße: 63 kb    Hersteller: Omega Engineering  
Kategorie: Boote Zubehör

Installation Precautions Tighten/remove with wrench on hex fitting only. Do not attempt to rotate gauge by turning housing. Use fittings appropriate for the pressure range of the gauge. Do not apply vacuum to gauges not designed for vacuum operation. NEVER insert objects into the gauge port or blow out with compressed air. Permanent damage not covered by warranty will result to the sensor. The DPG1100AD and DPG1100ADBL can be powered by any AC source of 8 to 24 VAC 50/60 Hz, or any DC source of

Omega Engineering SOLID STATE RELAYS SBG25873

heruntergeladen wurde: 9Dateigröße: 104 kb    Hersteller: Omega Engineering  
Kategorie: Pumps

Failure to observe this warning could result in serious injuries or damages. GROUP CAPACITANCE INDUCTANCE A & B 0.1 .F 3 mH C 0.2 .F 10mH D 0.3 .F 20mH Example: Typical values of capacitance for a twisted pair of copper wires is between 20 and 60 pF per foot. Using the maximum value of 60pF/ft, Groups A & B could have a run of 1500+ feet with safety. Inductance of a typical twisted pair is between 0.10 and 0.20 .H/ ft, thus making a cable run in this example essentially determined by the capacit

Omega Engineering DPG1100AD

heruntergeladen wurde: 9Dateigröße: 63 kb    Hersteller: Omega Engineering  
Kategorie: Boote Zubehör

GAUGE reference units may be re-zeroed without affecting the span calibration. The gauge port must be open to the ambient with no pressure or vacuum applied. Adjust the Zero control until the gauge reads zero with the minus (–) sign occasionally flashing. Span calibration should only be attempted if the user has access to a pressure reference of known accuracy. The accuracy of the calibration equipment should be at least four times the gauge accuracy. Zero calibration must be done before span ca

Omega Engineering DPG1000B

heruntergeladen wurde: 8Dateigröße: 191 kb    Hersteller: Omega Engineering  
Kategorie: Herzfrequenzmesser

Backlighting, NEMA 4X Ranges and Resolution Resolution is fixed as indicated in table Ranges in Bold are standard. Contact Omega Engineering to order other ranges listed below. abs: Absolute reference (normally reads atmospheric pressure, reads zero at full vacuum) vac: Vacuum gauge, minus sign not used unless specified –30.0 inHg/15.0 psig 120.0 inHg 1600 mmHg 35.0 bar 1.000 kg/cm2 abs –30.0 inHg/100.0 psig 199.9 inHg abs 760 torr abs 70.0 bar 1.000 kg/cm2 vac –30.0 inHg/199.9 psig 199.9 inHg 1

Omega Engineering DPG10L

heruntergeladen wurde: 7Dateigröße: 377 kb    Hersteller: Omega Engineering  
Kategorie: Boote Zubehör

Model and serial number of the product under warranty, and 3. Repair instructions and/or specific problem relative to the product. Non-Warranty Repairs For NON-WARRANTY REPAIRS, consult OMEGA for current repair charges. Have the following information available BEFORE contact OMEGA: 1. Purchase Order number to cover the COST of the repair, 2. Model and serial number of the product, and 3. Repair instructions and/or specific problem relative to the product. DPG10L M3367/0606 • Instructions The mod

Omega Engineering DP-F30

heruntergeladen wurde: 7Dateigröße: 2 mb    Hersteller: Omega Engineering  
Kategorie: Taschenrechner

Mm ENGINEERING. INC. Ill fMII.'i»' I /¿'r/imi/ot’irs 4 M1091/1289 99504 WARRANTY OMEGA warrants this unit to be free of defects in materials and workmanship and to give satisfactory service for a period of 13 months from date of purchase. OMEGA Warranty adds an additional one (1) month grace period to the normal one (1) year product warranty to cover handling and shipping time. This ensures that our customers receive maximum coverage on each product. If the unit should malfunction, it must b

Omega Engineering CDE681

heruntergeladen wurde: 7Dateigröße: 668 kb    Hersteller: Omega Engineering  
Kategorie: Andere Werkzeuge

Box 4047 IS0 9001 Certified Stamford CT 06907-0047 TEL: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com Canada: 976 BergarLava1 (Quebec) H7L 5A1, Canada TEL: (514) 856-6928 FAX: (514) 856-6886 e-mail: info@omega.ca For immediate technical or application assistance: USA and Canada: Sales Service: l-800-826-6342 / l-800-TC-OMEGA” Customer Service: l-800-622-2378 / l-SOO-622-BEST@ Engineering Service: l-800-872-9436 / l-800-USA-WHEN@ TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA Mexico: E

Omega Engineering FLR1000

heruntergeladen wurde: 6Dateigröße: 604 kb    Hersteller: Omega Engineering  
Kategorie: Andere Werkzeuge

TABLE OF CONTENTS A. Introduction....................................................................................4 1. Unpacking .................................................................................4 2. Product Overview And Principle Of Operation ...............................4 B. Installation .....................................................................................5 1. General Considerations...............................................................6 2. Mounting

Omega Engineering SOLID STATE RELAYS SBG41705

heruntergeladen wurde: 6Dateigröße: 104 kb    Hersteller: Omega Engineering  
Kategorie: Pumps

• Fusing of the solid-state relays to be in accordance with Fig. 1. Fuse F1 to be 6 amps slo-blo, 120 VAC for 120V line voltage; 250 VAC for 240 V application. **Note: All intrinsically safe wiring to intrinsically safe solid-state relays must be segregated from non-intrinsically safe wiring. Lockwasher* NutLockwasher* NutMountingScrew Plate Lockwasher* Terminal Lug Notes: 1. *(Lockwasher to be internal or external tooth type) 2. Grounding hardwre to be #8 or larger and S.S. Fig. 5. Mounting Pla





Kategorien