The cutout depth must be 24". The refrigerator will project forward, slightly beyond adjacent 194Dia4 cabinetry, depending on your installation. The cutout depth beneath a soffit: When installed beneath a soffit, the soffit cannot exceed the 24" installation depth shown. The top case trim overlaps the bottom of the soffit. Frameless cabinets: The case trim overlaps cabinets at the top and sides. Therefore, frameless cabinets may require filler strips to prevent interference with cabinet door swi

Underside of Countertop to Floor , This Wall Area Must be Free of Pipes or Wires 1-3/4' Plumbing and Electric Service Must Enter Inside This Area - 23-5/8" Min, 24 Max. Г.......................... Design Information: This dishwasher is supplied as a white model. This dishwashers has a finished door and access panel. The door and access panel trim will accept custom panels up to 1/4" thick. A toekick is supplied and may be covered with a custom toekick to match kitchen decor. Side trim i

When formatting is finalized, the message “SD FINAL” will be printed. In case an error occurs, a corresponding error message will be printed. 5 Saving and Restoring All the Data Set the mode switch to the PGM position. Saving (writing) all the data The comfirmation message is printed. To execute * s 144 @ s 1A l To cancel Restoring (reading) the saved data The comfirmation message is printed. To execute * s 148 @ s 1A l To cancel * The message “ACCESSING CARD” will appear and stay on the display

Never use other cables. 1 External View The printer is a receipt/journal dual station type thermal printer, and therefore it does not require any type of ink ribbon or cartridge. Lift the rear of the printer cover to remove. To re-install, hook the pawls on the cabinet and close. Caution: The paper cutter is mounted on the printer (receipt side). Be careful not to cut yourself. Print head release lever The print head can be lifted by the green lever on the right side of the printer. Pulling the

For department 41-99: To program zero dsDept. code Unit price (max. six digits) A To program another department, start from the beginning without pressing the Akey. Key operation example Print 1000 . A Unit price If a department is not programmed to allow the entry of preset unit prices in functional programming, the department is automatically changed to allow the entry of preset unit prices by this programming entry. 2 PLU/UPC Programming The cash register can handle PLU codes and UPC codes. P

Lift the rear of the printer cover to remove. To re-install, hook the pawls on the cabinet and close. Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself. 5 Paper roll cradle (Receipt side) Print roller release lever (Receipt side) Print roller arm (Receipt side) Paper positioning guides Inner cover Take-up spool Paper roll cradle (Journal side) Print roller release lever (Journal side) Print roller arm (Journal side) Do not attempt to remove the paper roll

The P key is needed only for fractional entry. Key operation example [#/tm/sbtl| 29 @ 15 O 00 % |C«AT/NS] Print F0?%1 000 L 15-00% -10.25% — Percentage limit ■ Function parameters for %, & and ( Procedure ) To program “0” for all items *ABCDEFGH ■ %1 or %2 © To program for another key CANS 38 *: Item:_Selection:_Entry: A Tax 4 status Taxable 1 Non-taxable* 0 B Tax 3 status Taxable 1 Non-taxable* 0 C Tax 2 status Taxable 1 Non-taxable* 0 D Tax 1 status Taxable 1

Lift the rear of the printer cover to remove. To re-install, hook the pawls on the cabinet and close. Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself. Printer2 Operator display Receipt paper Drawer lock Drawer Printer cover Customer display (Pop-up type) Mode switch AC power cord Keyboard Take-up spool Print roller release rever Print roller arm Inner cover Paper roll cradle Paper positioning guides Do not attempt to remove the paper roll with the print

s. A (Smallest amount for which tax must be collected.) *Up to 4 types of tax are programmable. Example1: Set state tax 6.25% with tax exempt as 12. s9@ 1@ 6P25@ 12 sA Tax 1 Tax rate (6.25%) Min. taxable amount ($0.12) Example2: Set state tax 4% with tax exempt as 0. s9@ 1@ 4 sA Tax 1 Tax rate (4%) Other Programming While the cash register is pre-programmed so it can be used with minimal set-up, it does provide you optional features. For details, please refer to the instruction manual. Initial s

First release the head with the print head release lever, and then remove the paper. • Never touch the surface of the print head. • Never touch around the print head and the motor during printing or before they have had sufficient time to cool. ■ Cautions in handling the recording paper (thermal paper) • Use only paper specified by SHARP. • Do not unpack the thermal paper until you are ready to use it. • Avoid heat. The paper will color at around 70°C. • Avoid dusty and humid storage plac