5 Unmount the Adaptec Storage Manager Installation CD: umount /mnt Installing on Solaris Note: If a previous version of Adaptec Storage Manager is installed on your system, you must remove it before beginning this installation. Any customization files you created with the previous version are saved and used in the upgrade. To remove Adaptec Storage Manager, type the pkgrm RaidMan command. To install Adaptec Storage Manager: 1 Insert the Adaptec Storage Manager Installation CD. The CD mounts auto

AHA-1510A/20A Series host adapters give you access to Adaptec’s ASPI (Advanced SCSI Programming Interface) family of software. This family includes device drivers that work with tape, disk, CD-ROM, WORM, and DAT devices and also with operating systems such as DOS, OS/2, UNIX, and NetWare. The ASPI software communicates with the operating system managers through the common ASPI platform. AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAHA-1510A/20A Series User’s Guide A AA AA ASt

4.6 Novell NetWare - When starting the NetWare operating system, the Adaptec Storage Manager agent may fail to start. A message "The Storage Manager agent failed to start" displays when starting the server. The server is unable to load the Storage Manager agent. This is usually caused by loading Java before the Storage Manager agent. In the file Autoexec.ncf, move the line "LOAD RAIDAGNT -BOOT" so that it is before any lines that reference Java. - A NetWare system can run only one instance of th

- After using a hot spare to successfully rebuild a redundant pool, information about the hot spare drive may not display as expected. Adaptec Storage Manager may continue to display it as a global hot spare. -------------------------------------------------------------------- 4. Operating System-Specific Issues and Notes 4.1 All - Adaptec Storage Manager will not start on a system that uses only 16 colors. Adaptec Storage Manager supports a minimum of 256 colors. See section 4.2 for a special n

Then the ACU will run. On IBM systems, press any key when prompted to load the utility forcibly. The ACU /C0 buildall command does not start a build/verify on RAID 1 or RAID 10 arrays that are being created using the quick init method. 4.8 FreeBSD Adaptec Storage Manager is not supported in FreeBSD; storage management must be done through the Adaptec Configuration Utility (ACU) and ARCCONF command line utility. 4.9 Adaptec Storage Manager After a rebuild and waking up from hibernation, a control