Hardware Parts List A. Arm ........................................................................................................................................... Page 2 B. FLEXmount™ ............................................................................................................................. Page 3 2. FLEXmount™ Set-up Options A. Desk Edge Clamp ................................................................................................................. Page 4 B. Through

FLEXmount™ Set-up Options Page 5 Through-Desk Mount Wall/Reverse Wall Mount Wall mounting hardware is not provided. Step 1 Step 1 Secure the large “L” bracket to a stud in the wall using wood screws. Reverse Wall Mount: Follow Step 1 above; be sure the short side of the “L” bracket is on top. Drill a hole 3/8” into desk or mounting surface bout 1 1/2”-2” in from the edge of the surface edge. Step 2 Remove the backing on the Neoprene foam pad and affix to the bottom of the mount cup. (ONLY if you

Slide the stand off of the monitor toward you. Step 2 Attach the tilt mechanism to the adapter plate using four (4) #10-32 x 3/8” Flat Head Philips Pan screws. Step 3 Align the tilter and apple adapter bracket with the extrusion on the back of the monitor; sliding it into the slot on the bracket. Slot Slot Step 4 Attach the Apple bracket to the monitor using the (3) M3 x 16 Socket Head Screws. *You will need to press down on the bracket in order to line up the holes. (This is intended as it assu

2008 P502373 The following patents apply: 6,409,134, 6,505,988, 6,726,167 Apple Cinema Display and Apple Studio Display are registered trademarks of Apple Computer, Inc. Rev D Hardware Parts List - Arm Page 2 Item Description & Part No. Quantity 10-32 x 3/8" Phillips Flat Head Screw 705198 1 Dog Washer 105189 1 10-32 x 3/8” Phillips Flat Head Screw 702281 1 (4-pack) M3-16 Socket Head Screw 702038 3 M3 Steel Nut 702161 3 1 M3 Wrench DX2013 M2 Allen Wrench 702040 1 1 M2.5 Allen Wrench 702218 1 Cab

Connect the end of the USB extension into the end of the USB coming out of the keyboard. Feed the cord through the arm as above step indicates. Step 3 Tuck the monitor cable, USB extension and the remaining cables through the opening slot of the lower channel of the arm. Slide the plastic cable trough into place until it locks. Adjusting your LCD arm Page 10 Adjusting Tilt Using the 7/32” allen wrench, tilt the monitor so it faces up and locate the set screw under the tilter. To tighten friction