Hersteller: Adaptec Dateigröße: 23.96 kb Dateiname: Unterrichtssprache:

Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite

- After using a hot spare to successfully rebuild a redundant pool, information about the hot spare drive may not display as expected. Adaptec Storage Manager may continue to display it as a global hot spare. -------------------------------------------------------------------- 4. Operating System-Specific Issues and Notes 4.1 All - Adaptec Storage Manager will not start on a system that uses only 16 colors. Adaptec Storage Manager supports a minimum of 256 colors. See section 4.2 for a special note about Windows color requirements. - If the Adaptec Storage Manager GUI does not repaint correctly, select the View->Refresh menu item to repaint the screen. 4.2 Windows - All - The Java Virtual Machine has a problem with the 256-color palette. (The Adaptec Storage Manager display may be distorted or hard to read.) Set the Display Properties Settings to a color mode with greater than 256 colors. - When you shut down Windows, you might see the message "unexpected shutdown". Windows displays this message if the Adaptec Storage Manager Agent fails to exit within 3 seconds. It has no affect on file I/O or other system operations and can be ignored. 4.3 Windows for EM64T and AMD-64 - RAID controllers do not produce an audible alarm on the following 64-bit Windows operating systems: o Windows XP Professional x64 Edition o Windows Server 2003 x64 Edition (all versions) 4.4 Windows Vista Business and Ultimate (64-bit versions) - Flashing a RAID controller on Windows Vista 64-bit systems is not supported in this release of Adaptec Storage Manager. NOTE: Although you can run the image update wizard from Adaptec Storage Manager on a Windows Vista 64-bit system, the wizard does not run to completion. 4.5 Linux - When you delete a pool, the operating system can no longer see the last pool. WORKAROUND: To allow Linux to see the last pool, restart your system. - The controller does not support attached CD drives during OS installation. - To remotely manage a Linux system from a Windows system, you must use the standalone GUI. - If you cannot connect to a local or remote Adaptec Storage Manager installed on a Linux system, verify that the TCP/IP hosts file is configured properly. 1. Open the /etc/hosts file. NOTE: The following is an example: 127.0.0.1 localhost.localdomain localhost matrix 2. If the hostname of the system is identified on the line with 127.0.0.1, you must create a new host line. 3. Remove the hostname from the 127.0.0.1 line. NOTE: The following is an example: 127.0.0.1 localhost.localdomain localhost 4. On a new line, type the IP address of the system. 5. Using the Tab key, tab to the second column and enter the fully qualified hostname. 6. Using the Tab key, tab to the third column and enter the nickname for the system. NOTE: The following is an example of a completed line: 1.1.1.1 matrix.localdomain matrix where 1.1.1.1 is the IP address of the server and matrix is the hostname of the server. 7. Restart the serv...

Dieses Handbuch ist für folgende Modelle:
Andere - Adaptec RAID 5445 (23.96 kb)
Andere - Adaptec RAID 5405 (23.96 kb)
Andere - Adaptec RAID 52445 (23.96 kb)
Andere - Adaptec RAID 51245 (23.96 kb)

Herunterladen

Geben Sie zwei Ziffern: