Anleitung Adaptec, modell Adaptec RAID 5805
5 Unmount the Adaptec Storage Manager Installation CD: umount /mnt Installing on Solaris Note: If a previous version of Adaptec Storage Manager is installed on your system, you must remove it before beginning this installation. Any customization files you created with the previous version are saved and used in the upgrade. To remove Adaptec Storage Manager, type the pkgrm RaidMan command. To install Adaptec Storage Manager: 1 Insert the Adaptec Storage Manager Installation CD. The CD mounts automatically. (If it doesn’t, manually mount the CD using a command similar to the one shown below. Refer to your operating system documentation for detailed instructions.) mount -F hsfs -o ro/dev/dsk/c1t0d0s2/mnt 2 Install Adaptec Storage Manager: pkgadd -d//solaris/manager/StorMan.ds 3 Follow the on-screen instructions to complete the installation. 4 Eject or unmount the Adaptec Storage Manager Installation CD. Refer to your operating system documentation for detailed instructions. Chapter 2: Installing Adaptec Storage Manager . 22 Installing on VMWare To install Adaptec Storage Manager: 1 Mount the Adaptec Storage Manager Installation CD: mount -r /dev/cdrom /mnt/cdrom 2 Change to the cdrom directory: For Red Hat cd /mnt/cdrom/linux/manager For SUSE cd /media/cdrom/linux/manager 3 Extract the Linux Adaptec Storage Manager RPM package and install it: rpm --install ./StorMan*.rpm Note: Ignore the note that says "Application can be started by typing /usr/StorMan/ StorMan.sh". The console has no graphical capability. 4 Use the command line utility (ARRCONF) included with your RAID controller to configure and manage your disk drives. For more information, refer to the Command Line Interface User’s Guide on the Adaptec Storage Manager Installation CD. 5 To use Adaptec Storage Manager to connect remotely from another system, you must open a range of ports in the built-in firewall using this command: esxcfg-firewall -o 34571:34581,tcp,in,”StorMan” For more information, see Logging into Remote Systems from the Local System on page 31. Using Adaptec Storage Manager with a Firewall If your system or network includes a firewall, you must unblock these ports: . 8003 (TCP) . 34580 (TCP) . 34570 to 34579 (TCP) . 34570 (UDP) . 34577 to 34580 (UDP) If you have installed the GUI and Agent on a system running Windows XP, you must also unblock the javaw process in the Windows firewall. Refer to your operating system documentation for instructions. Chapter 2: Installing Adaptec Storage Manager . 23 Running Adaptec Storage Manager from the CD This section describes how to run Adaptec Storage Manager from the Adaptec RAID installation CD included in the kit, instead of as an installed application. When you run Adaptec Storage Manager from the CD, you are using bootable-CD mode. When to Choose Bootable-CD Mode Use Adaptec Storage Manager in bootable-CD mode if you want to install your operating system on a...
