6. DIE OBERE ABDECKUNG DARF WAHREND DES BETRIEBES ODER SOLANGE DAS GERAT AN DAS NETZ ANGESCHLOSSEN IST NICHT ENTFERNT WERDEN. ES BESTEHT DIE GEFAHR EINES STROMSCHLAGES. Ferner kann unsichtbare Laserstrahlung austreten. SETZEN SIE SICH NIEMALS DIREKT DIESER STRAHLUNG AUS. 1. Auspacken und Zubehor Ihr CLASSE-CDP-10 ist von einem stabilen Kunststoffbeutel und halbstarrem Dammmaterial umgeben sicher in einem Spezialkarton verpackt. Entfernen Sie die Kunststoffverpackung und prufen Sie, ob das Gerat

. Ensure that the disc surface is clean, and try reinserting it. . Check that the label side of the CD is facing up. ENGLISH 37 ENGLISH 4. The disc is spinning but there is no sound in one or both channels. . Check that both interconnect cables are properly connected between the outputs of the disc player and the inputs of your preampli–er. . Ensure that the preampli–er/ampli–er units being used are properly con–gured. (You may need to consult those units» owner»s manuals for more information.)

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. NOTICE All of us at Classe take extreme care to ensure that your purchase will remain a prized investment. We are proud to inform you that all Classe components have been officially approved for the European Community (CE) mark. This means that your Classe product was subjected to the most rigorous manufacturing

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

Classe’s Controller Area Network, or CAN-Bus, opens the way to a new level of interaction between our Delta range of amplifiers, preamps, processors and source components. When the SSP-800 is connected with CAN-Bus, the different elements of a Delta series system are in constant communication, creating a “global” network that delivers system wide status information and shared operational features, all through the touchscreen display. CAN-Bus will allow a single Delta series touchscreen to: • Dis

Do not operate the Classe Omega SACD Player with any portion of the chassis removed or open. Dangerous voltages and laser radiation may be encountered. Connecting this unit to AC voltages other than that specified on the rear of the unit may cause extensive damage and increase risk of shock. Check to make sure your local AC voltage matches the voltage specified on the rear of your Classe Omega SACD Player power supply unit. Do not operate this product near sources of heat such as radiators, fire

• In the relative system, there is a calibrated, reference volume at which movies are played in theaters, which is duplicated in your environment and referred to as “0 dB.” Regardless of how large or how small the theater, a setting of “0 dB” is always the same, known volume. Changes from that volume level are shown as either positive (louder) or negative (quieter). People who have spent any time making recordings will recognize that this is similar to the notion of “0 dB” on a record level mete

8 Special Design Features ...................................................................................9 flexible graphical user interface................................................................ 9 highly refined circuit design ..................................................................... 9 extensive listening tests ............................................................................ 9 extraordinary longevity ..........................................................

Caution! If you see any Channel LED Indicator blinking red, please disconnect the amplifier from the AC mains immediately and check that all external connections are cleanly made and secure. If the AC mains are not easily accessible, you can press and hold the Standby button for three seconds to reset the amplifier. If no fault is immediately obvious, please call your authorized Classe dealer for assistance. 4 Mode button The Mode button is used (along with the Select button) when configuring th

Manual speaker setup This receiver allows you to make detailed settings to optimize the surround sound performance. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers.). These settings are designed to customize your system, but if you’re satisfied with the settings made in Automatically setting up for surround sound (MCACC) on page 8, it isn’t necessary to make all of these settings. Caution • The test tones used in the S