3. Connect the left surround speaker terminals (+ & -) of your receiver to the left LS 300 rear surround speaker. 4. Connect the right surround speaker terminals (+ & -) of your receiver to the right LS 300 rear surround speaker. 5. Connect the center channel speaker terminals (+ & -) of your receiver to the LS 300/C center channel speaker. Note: If you are using an outboard Dolby© Surround Processor, the speaker terminals for the center and rear/surround speakers will be found on this component

In order to make sure that you are experiencing the best performance out of your speakers, please take a few moments to read this manual before you get started. Also, be sure to retain this manual should you need to refer to it in the future. © 1996 AudioSource, Inc. A Few Words about Compact Loudspeakers The AudioSource LS loudspeaker is designed to accurately reproduce high fidelity music, including today's demanding digital signals. The discrete compact Indoor/ Outdoor format is ideal for man

Please take a few moments to read this entire manual, and be sure to retain this document for future reference. Please read and observe all safety instructions detailed on page 2. NOTE: if any part of this product is damaged or missing, please call your dealer or AudioSource® directly at 1.800.435.7115 or 503.286.9300. Please read your warranty and retain your receipt and original carton for possible future use. For more information about AudioSource® electronics, speakers and accessories please

We trust that you will continue to enjoy the value and quality of your AudioSource PreAmp/Tuner Two. In order to make sure that you are experiencing the best performance from your component, please take a few moments to read this manual before you get started. Also, be sure to retain this manual should you need to refer to it in the future. © 1996 AudioSource, Inc. AudioSource1. Model PreAmp/Tuner Two * _ -—^ -—- -—^ Stereo PreAmpllfler and AM/FM Digital Tuner |-1 f*l (*! f*l (*l (« Remote

Always re t u rn to the normal listening location to evaluate any setting c h a n g e s . Placement Guidelines Prior to installing your new subwoofer, please consider the following guidelines. Placing the subwoofer near a wall or in a corner will greatly increase its bass response. As frequencies reproduced by subwoofers are long and need room to propagate, a subwoofer placed near the listening position will not sound as full as one placed farther away. Please be careful about placing anything d

Note: Before pressing either of the speaker selector buttons, be sure the AMP One's level controls are set at the minimum position. Phones You can connect headphones to the AMP One using a standard 1.4" stereo phone jack. To deactivate the speakers while you listen through headphones, simply turn off the A and B speaker selector buttons. Meter X0.1 This switch increases the sensitivity of the meters by a factor of ten, which is useful for monitoring the AMP One's output at low volume. In other w

NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTION AVIS LFE IN Limiter ON OFF On Off Light Bar Display 15 16 17 18 4 5 AMPSUB210 OWNER’S MANUAL 7 9200 North Decatur St. Portland, OR 97203 • 503.286.9300 • 5 REAR PANEL CONTROLS The AMPSUB210 can be turned on and off independently via the power switch on the front panel, by signal sensin

This is easy to do by observing the color, stripe, or ribbing that appears on the wire. The amplifier terminals will also be marked "Left " or "Right", and should be connected accordingly. 1. Speaker Mounting Two sets of accessories are provided with the feet and brackets. Depending on how you chose to position the speakers, you will probably want to use one or the other. The self-sticking feet will protect the surface the speaker is resting on, and will prevent the speaker from vibrating and sl

Please take a few moments to read this manual, and be sure to retain this document for future re f e rence. Note: If any part of this product is damaged or missing, do not contact your A u d i o S o u rce dealer. Please call us directly at 800-435-7115. Using the Controls/Front Panel Power This front panel button will manually switch the Amp Seven T on or off. A multicolored LED indicates its power status. To use the Auto On feature, leave this front panel switch in the on position. Speaker Sele

We trust you will continue to enjoy the value and quality of your AudioSource AMP Three for many years to come. To ensure the best performance from your unit, please take a few moments to read this manual. Also, be sure to retain this document for future reference. Note: If any part of this product is damaged or missing, do not contact your AudioSource dealer. Please call us directly at 800-435-7115. Using the Controls Power This front panel button will manually switch the AMP Three on or off. A