Push the pedestal suction cup (A) firmly to the windshield. Flip the lever (B) down to secure the suction cup. Dash Installation (Optional, when disc is included) Step 1. Locate a safe flat surface on the dash or console to mount the pedestal. Clean the dash with the alcohol pad provided. Let the dash surface dry before applying the adhesive disc (C). Step 2. Push the pedestal suction cup (A) firmly to the disc (C). Flip the lever (B) down to secure the suction cup. Pedestal and Dual-T Head

Push the pedestal suction cup (A) firmly to the windshield. Flip the lever (B) down to secure the suction cup. Dash Installation (Optional, when disc is included) Step 1. Locate a safe flat surface on the dash or console to mount the pedestal. Clean the dash with the alcohol pad provided. Let the dash surface dry before applying the adhesive disc (C). Step 2. Push the pedestal suction cup (A) firmly to the disc (C). Flip the lever (B) down to secure the suction cup. Pedestal and Dual-T Head

Push the release button (H) in order to release the device from the cradle. /K Safety Precautions Do not install Arkon products over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc. assumes no responsibility of liability for injury or death as a result of car crashes and/or air bag deployment. Arkon Resources, Inc. is not responsible for any damages caused to your car, your device, or yourself due to the installation or use of this mounting solution. ARKON' The

How to use this guide These symbols can be supplemented by small icons or text. Lift the receiver. Line key. Hang up. Specific key on numeric keypad. Numeric keypad. Partial view of display.;. Means that the function is subject to programming. If necessary, contact your installer. Means that the function can be accessed by pressing a programmed key - see Programming the programmable keys. Adjustment “reduce”. Fixed key. Adjustment “increase”. MENU key. Loudspeaker, hands free. Voice mail access

Screw the flexible steel shaft into the Seat Bolt Bracket. Step 2. With a socket wrench, loosen the passenger seat bolt, insert the Seat Bolt Bracket, and retighten the seat bolt. A Safety Precautions Drilling onto the floor or console can permanently damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into the gas tank, electrical system or other highly sensitive vehicle components. Arkon Resources, Inc. is not responsible for any damages caused to

Push the pedestal suction cup (A) firmly to the windshield. Flip the lever (B) down to secure the suction cup. Dash Installation (Optional, when disc is included) Step 1. Locate a safe flat surface on the dash or console to mount the pedestal. Clean the dash with the alcohol pad provided. Dry the surface before applying the adhesive disc (C). Step 2. Push the pedestal suction cup (A) firmly to the disc (C). Flip the lever (B) down to secure the suction cup. Pedestal Adjustment Step 1. Adjus

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this device in a residential area is likely to cause harmful interference in which case the user will be required to correct the interfere

This equipment has been tested and found to comply with the limits of the European Council Directive on the approximation of the member states relating to electromagnetic compatibility according to EN 55022/55024 Part 15 B. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential energy and, if not installed and use

This will require drilling into your vehicle's interior surface. Console Mount Floor Mount Step 1. Position the Floor / Console Bracket and drill into the floor or console. Step 2. Attach the Floor / Console Bracket with screws and cover with plastic caps. Step 3. Screw the steel shaft into the Floor / Console Bracket. Pedestal Head Adjustments Step 1. Adjust the steel shaft by bending with both hands to the desired location of the male dual T-head. Step 2. Use the adjustment knob (A) a

Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, whic