Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
This will require drilling into your vehicle's interior surface. Console Mount Floor Mount Step 1. Position the Floor / Console Bracket and drill into the floor or console. Step 2. Attach the Floor / Console Bracket with screws and cover with plastic caps. Step 3. Screw the steel shaft into the Floor / Console Bracket. Pedestal Head Adjustments Step 1. Adjust the steel shaft by bending with both hands to the desired location of the male dual T-head. Step 2. Use the adjustment knob (A) and wing nut (B) on the pedestal head to swivel or rotate the head position if necessary. Step 3. Align the female dual T-slots on the cradle to the dual T-tabs on the pedestal head. Insert device. Connecting the cradle Slide the T-slots of the cradle onto the T-tabs of the mount head. Safety Precautions Drilling onto the floor or console can permanently damage the vehicle. Use caution and consult a mobile install professional to avoid drilling into the gas tank, electrical system or other highly sensitive vehicle components. Arkon Resources, Inc. is not responsible for any damages caused to your car or yourself due to the installation or use of the pedestal mount. ARKON RESOURCES INC. The Mobile Mounting Specialists™ Consumer Hotline: (USA) (800) 841-0884 Arcadia, CA 91006 USA (INT'L) (626) 254-9005 Made in Taiwan Mon-Fri. 9am-5pm, PST © Copyright 2007 Arkon Resources, Inc....
Dieses Handbuch ist für folgende Modelle:PDAs - CM925-S (74.66 kb)