Login:
Sortierung : Dateiname ↑   heruntergeladen   Bewertung   Dateigröße ↑  

Elite Screens 091709JA

heruntergeladen wurde: 0Dateigröße: 1 mb    Hersteller: Elite Screens  
Kategorie: Projektoren

Please follow the pre-cautions below for proper care procedures and to prolong the life of your StarBright7. Failure to comply will result in voiding your warranty. Avoid using any chemical compounds or harsh abrasives which will result in permanently damaging the screen material. • USE ONLY a soft non-abrasive cloth with mild soap and water to clean the screen material • DO NOT rub the cloth with force when cleaning to avoid permanently scratching the surface • DO NOT touch the screen surface w

Elite Screens exCinema

heruntergeladen wurde: 4Dateigröße: 468 kb    Hersteller: Elite Screens  
Kategorie: Projektoren

Bracket Hook Black Masking Border Edge Small support rod Locking sleeve White projection surface Lock Bottom Black Masking Big support rod Box Cover Note: Middle foot available on 120” models and above only. Box Foot Base Back Base anchor (available on models 120” and above only) Adjustable up to 1” Adjustment screw for leveling Attention: -Please install the two telescoping support rods simultaneously when pulling up and retracting the screen material. -Do not use the screen in a very strong wi

Elite Screens HQ7160

heruntergeladen wurde: 21Dateigröße: 356 kb    Hersteller: Elite Screens  
Kategorie: Standbacköfen

062309.JA info@elitescreens.com Rev. 062309.JA info@elitescreens.com Parts List Please make sure all parts listed below are included before assembly. 1. Suspension Bar x 4 pcs 4. Ceiling Panel x 4 pcs 2. Right Bracket x 1 pc 3. Left Plank x 1 pc 5. Left Bracket x 1 pc 6. Right Plank x 1 pc 7. Self.Drilling Screws x 8 pcs 8. Screw + Nut x 12 pcs 9. M5 Screws x 16 pcs 10. Connecting Sheet x 2 pcs Rev. 062309.JA info@elitescreens.com . . . . . . . ASSEMBLY Step 1: Install the screen’s left and righ

Elite Screens 010410-JA

heruntergeladen wurde: 1Dateigröße: 1 mb    Hersteller: Elite Screens  
Kategorie: Heimkino-Systeme

Frame Parts x 6 pcs (4 top/bottom frame pcs. + 2 side frame pcs) 2. Tension Rods x 6 pcs (4 top/bottom rods + 2 side rods) 3. Screen Material x 1 pc 4. Center joints x 2 pcs 5. Elbow Joints x 4 pcs 6. Wall brackets x 2 – 3 pcs (depending on model/size) 7. Screws x 16 pcs 8. User Guide x 1 pc 9. Center Support Bar x 1 – 2 pc s (depending on model/size) 10. Support joiner x 2 – 4 pcs (depending on model/size) 11. Fix Plates x 30 – 90 pcs (depending on model/size) 12. Black cloth backing x 1 pc (Ac

Elite Screens Insta-DE

heruntergeladen wurde: 12Dateigröße: 280 kb    Hersteller: Elite Screens  
Kategorie: Projektoren

For the best results and maximum product longevity, ALWAYS and ONLY use Elite Screens high density whiteboard Eraser. 2. Please use the microfiber cloth and clean water to cleanse the surface every 2-4 weeks to maintain a fresh and clean projection suface. ELITE SCREENS a. c. d. e. b. Insta-DE Screen User’s Guide Adhesive Dry-Erase Front Projection Screen Parts List QTY a. Insta-DE Screen Material 1 b. Pen holder 1 c. Whiteboard pens 3 d. Elite special high density whiteboard eraser 2 e. Microfi

Elite Screens 052611AS

heruntergeladen wurde: 0Dateigröße: 1 mb    Hersteller: Elite Screens  
Kategorie: Heimkino-Systeme

Please make sure that no other objects such as power switches, outlets, furniture, ladders, windows, etc. occupy the space designated to hang the screen. 2. Regardless if the screen is installed inside or on the wall, make sure that the proper mounting anchors are used and that the weight is supported appropriately by a strong and structurally sound surface just as any large and heavy picture frame should. (Please consult a home improvement specialist for the best advice on installation.) 3. Fra

Elite Screens Elite Tripod

heruntergeladen wurde: 1Dateigröße: 220 kb    Hersteller: Elite Screens  
Kategorie: Projektoren

060809-JA info@elitescreens.com Tripod Screen Parts Identification Tripod Screen Parts Identification Top Hook, Keystone Eliminator & Screen Handle Support beam Vertical Extension Bar Screen Material Screen case Carrying handle & Screen height adjustment lock/release tab Tripod junction Tripod Support Legs End cap Vertical locking sleeve ring Using the Screen A. Setting up the screen: Follow the steps below and Fig. 1 & 2. 1. Place the screen in an upright position (fig.1) with the legs toward t

Elite Screens WhiteBoardScreen

heruntergeladen wurde: 4Dateigröße: 630 kb    Hersteller: Elite Screens  
Kategorie: Projektoren

093009.JA info@elitescreens.com Parts List for WhiteBoardScreen™ Parts List for WhiteBoardScreen™ Please make sure all parts listed are included before proceeding with installation a b c de f G and H are not actual individual parts included but configurations only by combining parts (d) and (e) with the butterfly screw g h Ijk Note: The WhiteBoardScreen™ Series eraser should only be used for the WhiteBoardScreen™. Parts List a. Qty 4 – Butterfly screw b. Qty 12 – Wall screw c. Qty 12 – Hollow wa

Elite Screens 062310-JA

heruntergeladen wurde: 3Dateigröße: 694 kb    Hersteller: Elite Screens  
Kategorie: Projektoren

062310-JA info@elitescreens.com Kestrel Accessories Kestrel Accessories Qty 1 Radio Frequency Remote Control Qty 1 Infrared Remote Control Qty 2 AAA batteries Qty 1 Qty 1 Qty 1 5-12V Trigger Low Voltage 3-way IR “eye” Receiver Wall Switch IMPORTANT SAFETY NOTES 1. Please read this manual before use and follow the procedures specified: a. Please retain this manual for future reference. b. To avoid any damages to the screen, do not use any accessories or parts not recommended by Elite Screens. c.

Elite Screens REV.052411AS

heruntergeladen wurde: 2Dateigröße: 1 mb    Hersteller: Elite Screens  
Kategorie: Projektoren

Make sure the brackets are facing the front of the stand. 7. Attach the Holders (j) to the side legs and secure with M6x35 screws (n), M6 washers (q) and M6 nuts (o). (j) holder f (m) M6x20 (i) Bracket d1 d2 b c a (n) M6x35 5 Rev.052411.AS info@elitescreens.com 8. Attach the Projector Rail (g) to the Center Upright Bar (e) and secure with M6x15 screws (l), M6 washers (q) and M6 nuts (o). 9. Attach the Center Upright Bar (e) to the Middle Center Bar (d2) and to the Top Center Bar, and secure with





Kategorien