• When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged. • Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit. • Make sure th

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this device in a residential area is likely to cause harmful interference in which case the user will be required to correct the interfere

Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties, whic

Patent Numbers: 5,262,035; 5,264,104; 5,264,105; 5,593,852; 5,899,855; 5,918,603; 5,965,380; 6,071,391; 6,103,033; 6,120,676; 6,121,009; 6,134,461; 6,143,164; 6,162,611; 6,175,752; 6,284,478; 6,299,757; 6,329,161; 6,338,790; 6,461,496; 6,484,046; 6,503,381; 6,514,718; 6,560,471; 6,565,509; 6,591,125; 6,592,745; 6,605,200; 6,605,201; 6,616,819; 6,618,934; 6,676,816; 6,749,740; 6,893,545; 6,932,894; 6,942,518; 6,973,706; 6,990,366; 7,003,340; 7,003,341; 7,074,308; 7,090,756; 7,299,082. Abbott Diab

• Disk drive mechanisms, pan/tilt heads, power supplies, and MX Series products are warranted for a period of one (1) year. • AMX Lighting products are guaranteed to switch on and off any load that is properly connected to our lighting products, as long as the AMX Lighting products are under warranty. AMX does guarantee the control of dimmable loads that are properly connected to our lighting products. The dimming performance or quality cannot be guaranteed due to the random combinations of dimm

How to use this guide These symbols can be supplemented by small icons or text. Lift the receiver. Line key. Hang up. Specific key on numeric keypad. Numeric keypad. Partial view of display.;. Means that the function is subject to programming. If necessary, contact your installer. Means that the function can be accessed by pressing a programmed key - see Programming the programmable keys. Adjustment “reduce”. Fixed key. Adjustment “increase”. MENU key. Loudspeaker, hands free. Voice mail access

19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD. 161-165 Princes Highway, Hallam Victoria 3803, Australia Phone 03-8787-1200 ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 Munchen, Germany Phone 089-32 42 640 ALPINE ELECTRONICS OF U.K. LTD. Alpine House Fletchamstead Highway, Cove

This equipment has been tested and found to comply with the limits of the European Council Directive on the approximation of the member states relating to electromagnetic compatibility according to EN 55022/55024 Part 15 B. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential energy and, if not installed and use

Although ARKON designs reliability into all equipment, there is always the possibility of a malfunction occurring. You can use this manual to help in diagnosing and repairing the malfunction, if possible. If the malfunction persists, call or write the ARKON Customer Service Department for assistance. Address and contact information: RTM-Expolink s.r.o., Prikop 8, 60200 Brno, Czech Republic Tel: +420 545 175 834. Tel/ Fax: +420 545 175 684 Email: office@rtm-expolink.com Website: For other countri

KULLANIM KILAVUZU CB105 GB GB Welcome Thankyou for choosing a Rexel binding machine. We aim to produce quality binding machines with features that enable you to create excellent results every time. Before using your machine for the first time, please take a few minutes to read through this guide. The Getting Started section will enable you to bind straight forward documents easily. D Wellkommen Wir danken Ihnen, dass Sie ein Rexel Bindegerat gewahlt haben. Es ist unser Ziel, Qualitatsbindegerate