Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. © Copyright June, 2006 Disclaimer The information in this document is subject to change without notice. The manufacturer makes no repre- sentations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. The manufacturer reserves the right to revise this publication and to make

3. To adjust the angle of the picture, turn the tilt adjuster [D] right or left until desired angle has been achieved. Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom con- trol (on the projector only) to resize the projected im- age and screen size. B 2. Use the Image-focus con- trol (on the projector only) to sharpen the projected image A. 3. Press the Keystone button on the remote control. The keystone control ap- pears on the display. 4. Use the Keystone button to correct image d

The EL320.240-FA3 utilizes Planar’s proprietary Integral Contrast Enhancement technology combined with red and green filters patterned over Planar’s industry-leading yellow phosphor to achieve unparalleled image quality in hues of red, green and yellow. Three intensity levels in each of the red and green sub-pixels generate sixteen distinct colors (nine chromatically different colors, black, and two mid-levels of red, green, and yellow.) The display consists of a solid state EL glass panel, depi

NOTE: .. When setting up this monitor for the first time, perform AUTO-SYNC before use. .. To perform AUTO-SYNC, first display an image that makes the entire screen very bright. It is better to perform AUTO-SYNC under WINDOWS. * BRIGHTNESS Adjusts the brightness level of screen image. Under the Main Menu, select BRIGHTNESS using [+] or [.] button, then press [Menu] button to activate the function. Press the [+] button to increase the brightness, [.] button to decrease the brightness shown below.

Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipme