PRECAUTIONS Information for users applicable in European Union countries 1 Information for users applicable in United States of America 11 Power connection 1 Maintenance 1 Transporting the monitor 1 GETTING STARTED Package contents 2 Monitor installation 2 Identifying parts and controls 3 Working with OSD Group 3 Customizing your Monitor 3 Introduction to Hotkeys 4The operation of Function menu 4 OSD icon list 5 Troubleshooting 6 Technical Features and Specifications7 Interface Frequency 7 Adden

From the Main menu, select "Configuration * Network * IP Configuration * Manual Setting * IP Address " to set the IP address. And then input the Subnet Mask, Default Gateway, and Preferred DNS Server from the same menu screen. Note: ■/ Please use*, ♦ keys to change the value of IP address, Subnet Mask, Default Gateway, and Preferred DNS. 10 ENGLISH (GB) B. Wireless connection (for IRF model only) If your LAN supports wireless access to the internet, you can configure the IRX for wireless

This equipment should not be used for such purposes. FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

Select a service of information provided. IV. UPnP function Select "UPnP" from the Main menu to enter the UPnP function. IRX will list all the available UPnP server in the LAN. Select a server and press ENTER to link to the server. All the media files in the server will be listed by category. Select a folder and press ENTER key to open Select a file and press ENTER key to play. Note: ■/ IRX supports the following UPnP servers, Tversity, and Twonkey. Please go to its web to purchase or downlo

2 INSTALLATION 2 POWER CONNECTION 2 MAINTENANCE……… 2 TRANSPORTING THE MONITOR 2 GETTING STARTED 3 PACKAGE CONTENTS 3 INSTALLATION OF FIRST USE 4 IDENTIFYING PA RTS AND CONTROLS 4 FUNCTIONS OF THE BUTTONS AND INDICATOR: 4 SETUP 5 CUSTOMIZING YOUR MONITOR 6 Working with OSD Group. 6 Introduction to Hotkeys and the Characteristic Functions…………………………………………. 6 OSD Icon list …………………………………………………………………………………………… 7 TROUBLESHOOTING 9 TECHNICAL FEATURES AND SPECIFICATIONS...................................

Should the unit require service, contact an authorized service location. TABLE OF CONTENTS BEFORE USE Safety Precautions Important Safety Instructions Notice 01 02 04 PBC MENU A-B REPEAT 13 13 13 Disc Protection04 REPEAT 13 Battery Playable Discs Accessories Lithium 05 07 07 ZOOM OSD SUBTITLE 13 13 13 SEARCH 13 PROGRAM 14 AUDIO 14 RANDOM 14 Panel 08 VOLUME and MUTE 14 Basic connection 10 ANGLE 14 Remote control 11 TFT-M 14 CONTROL and CONNECTION SPECIAL FUNCTION PLAYBACK BASIC PLAYBACK REMOTE CO

Do not connect your new unit to your computer before installing the drivers. Tips If you accidentally begin installation with your unit connected and the Add New Hardware Wizard or Found New Hardware Wizard dialog box appears, click the Cancel tab. Installation Steps: 1. Insert the Installation CD into your CD-ROM drive. The installation program should start automatically. Follow the on-screen instructions to finish up the installation. 2. Click the “Speaker Phone Driver” icon to install device