This feature is useful for limiting the output of the source device to either 2 or multi-channel audio formats. NOTE: This selector switch will only affect the pre-programmed EDID in the INTERNAL (INT) EDID Mode. The GefenToolBox 1:4 Splitter for HDMI can use either of the following settings for audio format support: 1. 2 Channel: This setting will limit the audio formats listed in the pre- programmed EDID to 2 channel LPCM. For a full listing of the audio formats in this mode please see page 10

See pages 7-10 for more details. 2 FEATURES HDMI 1.3 Features • 225 MHz (up to 12 bit YUV 444 @ 1080p) • Deep Color • Dolby TrueHD and DTS-HD Master Audio • Lip-Sync Features • Simultaneously displays a single Hi Def source on up to four (4) HDTV displays without signal loss. • Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p and 1920x1200@60 Hz. • 3DTV Pass-Through • Fast Switching Technology for quick and responsive HDMI signal routing. • Auto-EDID Management for

c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 support@gefentv.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. Mini 1:8 Splitter for HDMI 1.3 is a trademark of Gefen Inc. © 2009 Gefen Inc., All Rights Reserved All trademarks are the property of their respective companies Rev A CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting A

Home Theater Scaler Pro is a trademark of Gefen LLC All trademarks are the property of their respective companies. © 2011 Gefen, LLC. All rights reserved. All trademarks are the property of their respective companies. Rev X2 CONTENTS CONTENTSCONTENTSCONTENTSCONTENTSCONTENTS Introduction Operation Notes Features Panel Layout Panel Descriptions Connecting And Operating The Home Theater Scaler Pro Specifications Warranty INTRODUCTION Congratulations on your purchase of the Home Theater Scaler Pro.

c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 support@gefentv.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. Extender for HDMI 1.3 Over CAT-6 is a trademark of Gefen Inc. © 2008 Gefen Inc., All Rights Reserved All trademarks are the property of their respective companies Rev X1 CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Sender Unit Panel Layout 5 Sender Unit Panel

Write To: Gefen LLC c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 support@gefentv.com Notice Gefen LLC reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. GefenTV HDMI to HDMI Plus Audio Converter is a trademark of Gefen, LLC HDMI, the logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing in the United States and other countries. © 2011 Gefen, LLC, All

Your complete satisfaction is very important to us. GefenTV GefenTV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line and hope you find your solutions.. Don’t see what you are looking for here? Please call us so we can better assi

7 5V DC Power Input Receptacle Connect the included 5V DC Locking Power Supply to this receptacle. 8 Power Indicator LED This LED will become active once the included 5V DC power supply has been properly connected to the unit and a power source. 5 CONNECTING AND OPERATING THE GEFENTOOLBOX 1:8 SPLITTER FOR HDMI WITH FST How to Connect the GefenToolBox 1:8 Splitter for HDMI with FST 1. Use the supplied HDMI cable to connect a Hi-Def source device to the HDMI input port of the GefenToolBox 1:8 Spli

FAST MODE: Setting the Splitter to FAST mode will improve performance when connecting / disconnecting Hi-Def sources, and powering ON / OFF HDTV displays. NOTE: When switching from SLOW mode to FAST mode, the HDTV displays connected to the Splitter will blink momentarily. SLOW MODE: When set to SLOW mode, the Splitter will follow the standard authentication process, based on the HDMI and HDCP specifications. SLOW mode is recommended when the source does not support multiple devices. 12 WALL MOUN

2. Audio may not be heard on all output devices/displays. These symptoms usually arise from video resolution / audio format incompatibilities between the devices / displays connected to the splitter. TheGefenToolBox 1:4 Splitter for HDMI with FST can use one of two methods to acquire and retransmit an EDID to the A/V source device telling it about the kind of output devices that are connected to the Splitter, thus curing the incompatibility. Either the Splitter can obtain EDID from display devic