fig.00-100 3. Select the pad bank. For this example, press pad [5] to select USER BANK 1. 4. Press pad [5]. The sample will play. 5. Press [CHOP]. fig.00-29a 6. Use the VALUE dial to set the detail (RESOLUTION) at which the sample will be divided. Higher settings will cause the sample to be divided into a larger number of samples. 7. To execute the operation with the resolution level you specified in step 6, press [F1] (EXECUTE). To cancel, press [F2] (CANCEL). * If you press [F3] (CANCEL) while

These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, this manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Main Features . COSM Modeling faithfully creates the speaker characteristics, internal cabinet resonance, rotation speed adjustments, and other particular elements of the rotary

Copyright © 2006 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced written permission of BOSS CORPORATION. Main Features....................................................................................................... 4 Panel Descriptions .............................................................................................. 5 Connections....................................................................................................... 10 Turnin

18; p. 21). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2001 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION

A motion of the filter changes depending on the strength or the position, when playing the bass. DEEP FILTER A saw-wave synth-bass sound with a strong filter effect. A motion of the filter changes depending on the strength or the position, when playing the bass. SQUARE A square-wave synth-bass sound. A motion of the filter changes depending on the strength or the position, when playing the bass. * When SYNTH (SAW LEAD–SQUARE) is selected, this effect does not function correctly if two or more no

ROOM This simulates the reverb sound of a smaller room. HALL This simulates the reverb sound of a larger hall. SPRING This simulates the sound of a guitar amp’s built-in spring reverb. MOD This is a reverb that adds modulation to the hall reverb to produce an extremely pleasant reverb sound. Using the Effects Using the Effects l PEDAL MODE Indicator You can make the setting that determines whether the ME50’ s expression pedal functions as a volume pedal or as an expression pedal. In addition, wh

The external MIDI device then switches its settings according to the Program Change message it receives. fig.10-01 Outputting Control Change Messages Data describing the actions of the CTL pedal, expression pedal, expression pedal switch, and external devices connected to the SUB EXP PEDAL/SUB CTL 1,2 jack are output as Control Change messages. Such messages can be used to (among other things) manipulate the parameters of an external MIDI device. MIDI Start/Stop, MMC Play/Stop MIDI Start/Stop or

--- NAME --** ** 0D 00 00 00 00 01 20 - 7F Name 1 *Refer to "Table Name" ** ** 0D 01 00 00 00 01 20 - 7F Name 2 *Refer to "Table Name" : : : : : ** ** 0D 0F 00 00 00 01 20 - 7F Name 16 *Refer to "Table Name" --- ASSIGN 1 --** ** 0E 00 00 00 00 01 00 - 01 ASSIGN 1:On/Off 00 : Off 01 : On ** ** 0E 01 00 00 00 02 00 00 -ASSIGN 1:Target *Refer to "Table Target" ** ** 0E 02# - 01 7F ** ** 0E 03 00 00 00 02 xx xx -ASSIGN 1:Target Min [Target Param Min <= Data <= Target Param Max] ** ** 0E 04# - xx xx

• Before moving the unit, disconnect the AC adaptor and all cords coming from external devices. .................................................................................................. • Before cleaning the unit, turn off the power and unplug the AC adaptor from the outlet (p. 14 ). .................................................................................................. • Whenever you suspect the possibility of lightning in your area, disconnect the AC adaptor from the outlet

Before using this unit, carefully read the sections entitled: • USING THE UNIT SAFELY (page 2–3) • IMPORTANT NOTES (page 4–5) These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Owner’s manual should be read in its entirety. The manual should be saved and kept on hand as a convenient reference. Copyright © 2005 BOSS CORPORATION All rights rese