The STK501 includes connectors, jumpers, and hardware allowing full support for the new features on ATmega103, ATmega64, and ATmega128. The Zero Insertion Force (ZIF) socket allows easy use of TQFP packages. In addition to providing support for new devices, the STK501 also adds support for peripherals previously not supported by the STK500. An additional RS-232 driver and an XRAM interface are among the new features. Devices with dual UART or XRAM interface can thus take advantage of the new res

Flexible Clocking, Voltage and Reset Supply Voltage 9 – 12V System MICROCONTROLLERSStarter Kit and Development System ©Atmel Corporation, 2002 Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifi

This configuration enables parallel hardware/software testing of the application under development at close to operational speed, with no penalty for hardware modifications. This enables software development to proceed in parallel with hardware development, and significantly reduces the design cycle time, increasing confidence in a right-first-time system solution. The AT91CAP7X-DK development board or “kit” is composed of three associated boards, namely Motherboard, Mezzanine and Memory Extensi

1-2 1.1 C51/C251 Support ....................................................................................1-2 1.2 Demo Board Features...............................................................................1-3 Section 2 Hardware Description ........................................................................... 2-4 2.1 Block Diagram...........................................................................................2-4 2.2 Specifications........................................

A MOSFET turns the backlight LEDs on/off and a 4.7ohm resistor limits the maximum current through the LEDs. This makes it quite easy to control the backlight with a PWM signal to adjust intensity. 8297A-AVR-04/10 The SPI interface The Display Xplained module uses a simple SPI interface to communicate with the LCD module. This consist of a Chip-Select (CS) line, a clock line (SCL), and two data lines (SDI/SDO). The SPI is operated in mode 3, i.e. inactive clock is ‘high’, and data is latched on r

They differ oniy in features, pin count and memory size. This enabie AVR to cover the compiete 8- and 16-bit market with one singie, compatibie product famiiy. FEATURES picoPower Technology Reducing power consumption-maintaining performance picoPower — Best MCU power budget Atmel’s picoPower technology reduces power consumption in both sleep and active mode. With picoPower technology the embedded designer can reduce the applications power consumption while maintaining performance. True 1.

One focus area of Atmel's broadcast radio activities is the car audio segment. Both Atmel's in-depth radio know-how and its high quality standards (ISO 9001 and TS 16949) enable Atmel to meet the specific quality and performance requirements in this market. Atmel provides entire car radio system solutions (baseband and front ends), and supports design-ins with a broad range of tools including software and dedicated reference designs. ELECTRONIC CAR ANTENNAS Since the number of different antennas

The system stack of Eureka-147-based digital radio (which includes DAB, DAB+, and T-DMB) provides the flexibility to implement a wide variety of services while providing a platform for the development of future services. Atmel has over 30 year’s experience designing digital radio solutions and offers a complete DAB solution including an RF front end and a DAB decoding baseband. The ATR2740 DAB baseband processor is a highly functional system-on-chip solution. Its flexibility enables the implemen

The kit allows designers to design, synthesize, simulate and program Atmel’s new FPSLIC product. A comprehensive tutorial takes designers through the complete FPSLIC development process. The starter kit, which runs on PC Windows®-based platforms, includes everything needed to get started with FPSLIC, including all software, tutorials, complete documentation, boards, parts and cables. The kit consists of a starter kit board that includes: AT94K40AL Device AT17LV010 Device AT17 Series ISP Port

. Description The ATR4262M1 is a single-chip AM/FM and weather band tuner dedicated for digital IF solutions in car-radio applications. ATR4262M1 is produced using Atmel®’s advanced BICMOS2S technology and fulfills the automotive requirements. This part is suitable for HD Radio™ reception as well as for DRM solutions. The high flexibility allows to design high performance and cost optimized tuner solutions. Broadcast Radio Front-end IC for AM/FM/DRM/HD Radio NOTE: This is a summary document. The