Place sh ms ]= I near screws. D) Let plaster dry. Read the rest of this manual while you wait! E) Using a medium grit sandpaper and a sanding block, sand the plastered areas smooth and flat. RECHECK THESE AREAS TO MAKE SURE THEY ARE FLAT. Re-plaster if you still find low places at countersunk holes or seams. WARNING: Applying the cloth 22. Make sure slate/slatron is dry and free of dust. NOTE: Before spraying adhesive, cut a podion of the shipping cation to use as a shield to prevent cement over

P]225LGRL 527.25155 MODEL NO. P]227LGRLA 527.25165 1. READ THIS MANUAL CAREFULLY BEFORE STARTING ASSEMBLY. Read each step completely before beginning each step. 2. SOME SMALLER PARTSMAY BE SHIPPED INSIDE LARGER PARTS.CHECK INSIDE ALL PARTS AND CARTONS BEFORE ASSEMBLING OR ORDERING PARTS. 3. USE THE HARDWARE IDENTIFIER TO IDENTIFY AND SORT ALL FASTENERS. CHECK ALL CARTONS FOR KITS. ALL HARDWARE IS NOT LOCATED IN ONE KIT. THIS TABLEISCONTAINED IN THREESEPARATECONTAINERS: PLEASE DO NOT RETURN PRODU

SA1 7DA. Tel 01792 796893 Fax 01792 796627 Email: sales@escaladeinternational.co.uk 1 / IMPORTANT SAFETY INFORMATION READ ALL INSTRUCTION BEFORE USING THIS OWNER’S MANUAL CONTAINS ASSEMBLY, OPERATION, MAINTENANCE AND SAFETY INFORMATION. IN THE INTEREST OF SAFETY, PLEASE MAKE CERTAIN THAT YOU READ AND UNDERSTAND ALL THE INFORMATION BELOW. 1. This machine is intended for household use only. It is not designed for commercial use. 2. Read the OWNER’S OERATION MANUAL and all accompanying literature a

with your original sales receipt. with your original sales receipt.with your original sales receipt. ools needed for assembly: Phillips Screwdriver T TTTools needed for assembly: Phillips Screwdriver ools needed for assembly: Phillips Screwdriverools needed for assembly: Phillips Screwdriver (not included); Assembly ool (included). Use (not included); (not included);(not included); Assembly T TAssemblyAssembly TTool (included). Use ool (included). Useool (included). Use only with a Power Wheels