Text mode gives sharper and better-colored images when showing printed material. 10) FREEZE: Freeze frame the image 11) BROWSE: Enable the function of side-by-side images comparison on same screen. 12) PLAYBACK: Playback saved pictures 13) FOCUS: Automatically focus the image 14) ZOOM UP, ZOOM DOWN: Zoom the image in and out SPECIFICATIONS: Power supply 12V DC power adapter Maximum power consumption 20 W Operatingcondition Temperature 0 — 45. Humidity 5% - 75% Non-condensing Dimentions(packing c

4 Figure 1-1. The VOL-1081 Fiber Switch .........................................................................4 Features ...............................................................................................................................4 2. Hardware Description...................................................................................... 5 Front Panel...........................................................................................................................5

In the interest of safety, the VOH802 DL should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle. TELEVISION RECEPTION This entertainment system is designed primarily for viewing pre-recorded movies or playing video games. Television reception in a moving vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary vehicle will result in an improvement, but may

Product Information, Photos, FAQ’s Owner’s Manuals ELECTRONICS CORP. 128-6117 Released 11-15-01. 1 of 16 WARNINGS . Do not use any solvents or cleaning materials when cleaning the video system. . Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. . Lock the LCD screen in the fully closed position when not in use. . Before putting on headphones always adjust the volume setting to the lowest position. . Reme

The remote control will operate the VOH703, Audiovox Televisions and Video Cassette Players. It is not a universal remote control and will not control equipment from other manufacturers. If a universal remote control is to be used with the VOH703, choose the remote encoding scheme for Audiovox Televisions when programming the remote. REMOTE CONTROL OPERATION TV/VIDEO MUTE CH VOL 5 6 8 9 PICTURE 2 3 CH WRITE ERASE/ AUTO PROGRAM PAUSE PLAY STOP 1-- SELECT VOL 4 7 1 SKIP/ SEARCH REW 0 FFWD R 1 2 9

-5 128-7288 5 of 16 Remote Control Operation BATTERY COVER Battery Installation Before attempting to operate your Remote Control, install the batteries as described below. 1) 2) 3) Turn the Remote Control face down. Using a fingernail, lift the battery cover off. Install two “AAA” batteries as shown. Make sure that proper polarity (+ or -) is observed. Align the cover tabs with the remote control and press down until the cover clicks. The remote control will operate the VOH1012 and most Audiovox

This feature is accessed by using either the FM transmitter buttons on the remote (On/Off, Channel Select) or the FM Select button on the unit. *NOTE: In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM signal from the overhead pod may not be satisfactory, resulting in static, distorted sound or signal bleed thru from strong local radio stations. This is not a defect in the product, but the result of a stronger local radi

•Verify that the remote sensor eye isnot obstructed. •Verify that the infrared transmitter isaffixed over the sensor eye of thecomponent to be controlled. -13 128-7288 13 of 16 Replacement Parts Remote Control 1363855 SpeciLCD Backlighting fications CFFL A/V Adapter 1123227 Resolution 800 x 480 Pixels 1,152,000 Operation Temperature 32 -140. F (0 - 60. C) Storage Temperature -4 - 158. F (-20 - 70. C) Backlight life 30,000 Hours Video Display System NTSC/PAL Video Output 1.0Vp-p @ 75 ohms Power S

Be sure that all wiring is protected from sharp edges and is routed in such a manner that pinched when all components and interior trim are fully installed. Be sure to leave enough slack in the wiring at each component to allow working room. 6) Remove all A/V system components from their packaging and place them loosely in the vehicle at their respective locations. 7) Connect all components together (electrically) and verify proper operation of all system functions. Note: This is best done BEFOR

Operation (Refer to Figure 3)........................................................6 K. Specifications...............................................................................7 Warranty.......................................................................................8 1 A. Introduction Thank you for selecting the VBDV56, 5.6 inch Liquid Crystal Display (LCD) Monitor. This Monitor is designed to enhance the VBP5000 Video In A Bag system. The connection of the Monitor is plug and play