Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
2 INSTALLATION 2 POWER CONNECTION 2 MAINTENANCE……… 2 TRANSPORTING THE MONITOR 2 GETTING STARTED 3 PACKAGE CONTENTS 3 INSTALLATION OF FIRST USE 4 IDENTIFYING PA RTS AND CONTROLS 4 FUNCTIONS OF THE BUTTONS AND INDICATOR: 4 SETUP 5 CUSTOMIZING YOUR MONITOR 6 Working with OSD Group. 6 Introduction to Hotkeys and the Characteristic Functions…………………………………………. 6 OSD Icon list …………………………………………………………………………………………… 7 TROUBLESHOOTING 9 TECHNICAL FEATURES AND SPECIFICATIONS............................................................................. 10 INTERFACE FREQUENCY………………………………………………………………………………. 11 SUPPORTED TIMING LIST………………………………………………………………………………. 12 ADDENDUM 14 REGULATIONS 16 FCC COMPLIANCE…………………………………………………………………………………………16 TCO’99..................................................................................................................................................... 17 2 Precauciones Precauciones Installation 1. Do not cover or block the ventilation ports on the rear of the monitor. 2. Do not install the monitor close to heat sources such as radiators or air ducts, or in a location exposed to direct sunlight, excessive dust, mechanical vibration, or shock. Power connection 1. Use the correct power cord for your local voltage. 2. Use an accessible outlet close to the monitor. 3. Do not allow anything to rest on the power cable. 4. Only use the power adapter attached to the monitor. 5. Disconnect the power cable from the power supply if: 5.1 You will not use the monitor for an extended period. 5.2 The cable is damaged or frayed. 5.3 The monitor has been dropped or the cabinet damaged. 5.4 A distinct change in performance indicates a need for servicing. Maintenance 1. Cleanthecabinetandcontrolswithasoftclothlightlymoistened withamilddetergent solution.Donotuseany abrasive materials or solvents such as alcohol or benzene. 2. Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such as pens or screwdrivers, as the screen may scratch. 3. Do no t insert objects or spill liquids into the ventilation ports on the monitor’s rear, a s fire, electric shock, an d / or unit failure may result. Transporting the monitor 1. When transporting the monitor for repair or shipment, fold the base of the monitor back until it becomes straight. Then wrap the monitor and its attachments with the original carton and packing materials. 3 Getting Started Getting Started Package contents Before beginning, ensure that the carton contains the following items: 1. LCD Monitor 2. Power cord (The plug may vary according to the electrical standard for your area) 3. Video Signal Cable (Analog, D-SUB Cable) 4. Audio cable (optional) 5. CD-ROM (Contains the driver of the monitor, this user’s manual and other information) 6. Quick Installation Guide 4 Installation of First Use 1. The installation of the monitor is very simple. Take the monitor from the packing box and remove all the packing materials. And then put the monitor on the desk carefully; fold the monitor base, so that the monitor can stand on the desk properly. Next, adjust the monitor to the desired position according to the seat and other factors. Identifying parts and controls 1. The LED indicator and control buttons are as follows: 2. The connection ports are as follows: Functions of the buttons and indicator: Button Functions 1. Turn on the monitor 2. Activate the OSD control menu 3. Select the specific function 4. Turn off the monitor by pressing the button for 3 seconds 1. Activate the Volume control menu, and increase the value (optional) 2. View the next function in the main OSD menu clockwise 3. Increase the value of specific function which has been selected 1. Activate the Volume control menu, and decrease the value (optional) 2. View the next function in the main OSD menu counter-clockwise 3. Decrease the value of the specific function which has been selected 1. Optimize the picture performance automatically Indicador LED 1. Green color indicates that the monitor is in “active” mode (normal operation). 2. Amber color indicates that the monitor is in “sleep” mode (power saving mode or no signal input). 3. Not lit indicates that the monitor is in “off” mode (monitor power off). 5 Setup 1. Connecting video (Note: Before connecting computer, ensure the resolution and refresh rat e of the computer do not exceed the following setting s -resolution: 1280*1024, refresh rate: 75Hz.) 1.1 Turn off your computer 1.2 Connect the video signal cable to the VGA port of your PC, tighten the screws on the connector onto the computer 1.3 Connect the other end of the video signal cable to the VGA-IN port at the back of the monitor, tighten the screws on the connector to the monitor 2. Connecting power 2.1 Plug thefemaleend of thepowercord intotheAC-INportattheback of themonitor 2.2 Plug the male end of the power cord into a power outlet 3 Connecting audio (optional) 3.1 Plug the audio cable into the AUDIO port at the back of the monitor 3.2 Plug the other ...