Ground yourself by touching some metal, such as the printer's metal base, before touching the printhead. To replace the printhead: 1. Turn off the printer. 2. Open the cover. 3. Unlock the printhead by turning the retaining latch. ©2001 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All rights reserved. 4. Press forward and down on the two latches on top of the printhead assembly as shown. The printhead will drop out. 2 6. Carefully unplug the cable from the printhead as show

............................ .................................................................................................................................................................................................................................................................................................................................................................................................................... ................................ Each product and program carries

When using narrow width labels (1.0”, 1.2”, or 1.5””) it is possible for coils of labels to slip over the front supply guide. This may jam the printer. Loose Coils of Labels Supply Guide Using the Optional Supply Guide Extension_ Using the optional supply guide extension (p/n 126286) keeps a new roll of narrow supply in line. Slide the extension down onto the front supply guide. Make sure the small tabs of the extension go between the outer slots of the front supply guide. Small Tabs AVERY

Although Avery Dennison has made every effort to provide complete and accurate information in this manual, Avery Dennison shall not be liable for any omissions or inaccuracies. Any update will be incorporated in a later edition of this manual. .2007 Avery Dennison Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system, or translated into any language in any form by any means, without the prior written permission of Avery Denniso

Dispose according to your local regulations. ♦ Do not disassemble, short-circuit, heat above 80°C, or incinerate the battery. It may explode. ♦ Follow the operating and storage limit specifications listed at the end of these instructions. Otherwise, the battery may permanently lose its charge capacity. WARNINGS AVERY DENNISON TC9465OI Rev. AE 12/07 ©2005 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All rights reserved. Connecting the Power Supply To connect the power suppl

The print server is different in the NP and SNP printers, so commands may vary slightly. This guide lists the NP printer default settings, serial communication settings, and console commands with their SNP equivalents (if applicable). Information in this document supercedes information in previous versions. Check our Web site (for the latest documentation and release information. Printer Defaults The following table lists the radio frequency (RF) defaults for the NP and the SNP printers. Functio

................................................ ............................................ .................... .................................................... ............................................................ Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Avery Dennison Corp. reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Avery D

Network Configuration............................................3-2 Additional Windows Configuration Methods................................................3-2 UNIX Network Configuration.....................................................................3-2 Berkeley UNIX Host Configuration.............................................................3-3 Sun Solaris Configuration.....................................................................3-HP/UX Configuration............................

User Manual Model 676 -LOKPRINT™ Machine Configuration 2 over 1, 1 over 1 & 2 over 0 AVERY DENNISON Manual Edition 3.0 20 August 2004 Manual Part Number 371389 This page intentionally blank User Manual Model 676 LOKPRINT® Contents Scope 1 Introduction................................................................................................................................1 Safety Issues / Warnings 1 Caution.....................................................................................

AB 1/08 ©2006 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All rights reserved. Each product and program carries a respective written warranty, the only warranty on which the customer can rely. Paxar reserves the right to make changes in the product, the programs, and their availability at any time and without notice. Although Paxar has made every effort to provide complete and accurate information in this manual, Paxar shall not be liable for any omissions or inaccuracies. Any upda