IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE. CLEANING AND STORAGE It is recommended that the heater be cleaned at least one time during the operating season in order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save the box for off-season storage. . Turn the heater “ OFF” , unplug it and wait for the heater to cool down. . Use a dry cloth

• With the Power and Setting Control “A” in the ”OFF” position, plug the heater into a grounded 120V outlet. • Turn the heater ”ON” by turning the Power and Setting Control “A” clockwise to your desired power setting (LOW, MED, or HIGH). The Power Indicator Light “C” will illuminate. • Turn the Thermostat Control “B” to your desired setting from “MIN” to “MAX”. Setting for Optimum Comfort: When the room reaches a comfortable temperature, slowly turn the Thermostat Control “B” counter-clockwise u

Note: To turn off the room temperature display, you must unplug the heater. B A Carry Handle (behind unit) IMPORTANT! Your heater is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your outlet. DO NOT defe

If this occurs, turn the heater ”OFF” , unplug it, and inspect and remove any objects on or adjacent to the heater. Allow it to cool for a few minutes, plug it back in, and resume normal operation. PATENTED ELECTRONIC TEMPERATURE CONTROL Your Disc Furnace is built to last and deliver outstanding performance for years. Unlike other portable heaters, it uses a patented electronic temperature control that automatically monitors the exact room temperature and compensates for heat loss. As a result,

To prevent overloading a circuit, do not plug the heater into a circuit that already has other appliances working. 16. It is normal for the plug to feel warm to the touch; however, a loose fit between the AC outlet (receptacle) and plug may cause overheating and distortion of the plug. Contact a qualified electrician to replace loose or worn outlet. 17. The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for

PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR PERSONAL INJURY. CLEANING AND STORAGE It is recommended that the heater be cleaned at least one time during the operating season in order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save the box for offseason storage. . Turn the heater “ OFF” , unplug it and wait for the heater to cool down. . Use

2. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater and keep them away from the sides and rear. 3. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended. 4. Always unplug heat

· Check for any obstruction. If you find any obstruction, turn the heater “OFF”. Unplug the heater and wait a few minutes for it to cool down. Carefully remove the obstruction. Plug the heater in and turn it on again by referring to the OPERATING INSTRUCTIONS. NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE WARRANTY INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR PERSONAL INJURY

Contact a qualified electrician to replace loose or worn outlet. 17. The output of this heater may vary and its temperature may become intense enough to burn exposed skin. Use of this heater is not recommended for persons with reduced sensitivity to heat or an inability to react to avoid burns. 18. “SAVE THESE OPERATING INSTRUCTIONS CAUTION: This heater includes a Thermal Cut- Off Overheat Protection System that shuts the heater off if it overheats due to abnormal conditions. If this occurs, tur