Login:

Dynasty Spas VS501

heruntergeladen wurde: 2Dateigröße: 406 kb    Hersteller: Dynasty Spas  
Kategorie: Andere Home Zubehör

Spa settings will be preserved until next power up. After the circ pump has been running for 2 minutes, the temperature will be displayed. DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool. Once the heater has cooled, reset by pushing any button. If spa does not reset, shut off the power to the spa and call your dealer or service organization. DO NOT ENTER THE WATER. Remove the spa cover and allow water to cool. At 107°F/42°C, the spa should automatically reset. If spa does no

Dynasty Spas VS500

heruntergeladen wurde: 1Dateigröße: 406 kb    Hersteller: Dynasty Spas  
Kategorie: Andere Home Zubehör

The default filter time is 2 hours. To program, press “Temp” or “Set,” then “Jets.” Press “Temp” or “Set” to adjust. Press “Jets” to exit programming. At the beginning of each filter cycle the blower purges for 30 seconds; the pump purges for 5 minutes. The only effect filter duration has is: 1) During the filter, the circ pump never turns off, and 2) In Economy and Sleep Modes, heating only occurs during the filter cycle. Freeze Protection If the temperature sensors detect a drop to below 44°F/

Dynasty Spas SSPA-1

heruntergeladen wurde: 9Dateigröße: 202 kb    Hersteller: Dynasty Spas  
Kategorie: Andere Home Zubehör

A second press will turn the pump to high speed. A third press will turn the pump off. A buiit-in timer will shut the pump off after 20 minutes unless it has been manually deactivated. The "Pump" indicator light will be on when the Pump is running. "Pump" indicator light 38 -«•$>& % i t> • • • • ^ /V V I'uap light lip llown To turn the light on: Press the Light key to turn the light on. A second press will turn the light off. A buiit-in timer will shut the light off after 2 hours unles

Dynasty Spas SLB 450 A16

heruntergeladen wurde: 2Dateigröße: 271 kb    Hersteller: Dynasty Spas  
Kategorie: Andere Home Zubehör

¦ Do not let the power cable hang over edges (trip wire effect). Inserting batteries into the remote control NOTICE The supplied battery (3V, type CR 2032) has already been fitted into the > remote control at the factory. Before use, remove the insulation strip from the battery compartment. To insert a new battery, proceed as follows: • Open the battery compartment at the rear of the remote control 9 by rotating the circular cover in the direction of the symbol . Use a small coin for turning it.

Dynasty Spas SC-MP-DY5

heruntergeladen wurde: 1Dateigröße: 224 kb    Hersteller: Dynasty Spas  
Kategorie: Andere Home Zubehör

Pressing a second time turns Pump 1 and Pump 2 to high speed. A third time turns both pumps off. A built-in timer automatically turns pumps off after 20 minutes (Pump 1 low speed after 2 hours), unless manually deactivated first. The "Pump 1" indicator flashes when Pump 1 is on at low speed. "Pump 1" and "Pump 2" indicators light up when both pumps are on at high speed. Starting the blower: Press Blower once to turn blower on. Pressing a second time turns blower off. A built-in timer automatical

Dynasty Spas SC-MP-DY4

heruntergeladen wurde: 0Dateigröße: 212 kb    Hersteller: Dynasty Spas  
Kategorie: Andere Home Zubehör

increments from 59 to 104.F (15 to 40.C). Temperature display unit: Press and hold Light key for 5 seconds to display water temperature in either Fahrenheit (.F) or Celsius (.C). If a power-up occurs, system returns to default setting (.F). Turning the light on: Press Light to turn light on. Pressing a second time turns light off. A built-in timer automatically turns light off after 2 hours, unless manually deactivated first. The "Light" indicator is displayed when light is on. Fiber Box Option:

Dynasty Spas SC-MP-DY1

heruntergeladen wurde: 1Dateigröße: 326 kb    Hersteller: Dynasty Spas  
Kategorie: Andere Home Zubehör

Press a second time to turn pump to high speed. Press a third time to turn pump off. When at high speed, a built-in timer turns pump off after 20 min- utes and when at low speed after 2 hours, unless manually deactivated first. The "Pump 1" indicator lights up when Pump 1 is on at high speed. It flashes when Pump 1 is on at low speed. Starting Pump 1: Press and hold Light key for 5 seconds to display water temperature in either Fahrenheit (.F) or Celsius (.C). If a power-up occurs, system re- tu

Dynasty Spas Neptune Series

heruntergeladen wurde: 4Dateigröße: 184 kb    Hersteller: Dynasty Spas  
Kategorie: Andere Home Zubehör

The LED lights will automatically turn themselves off after 2 hours in any one setting. Neptune Series Spas feature an easy-to-change selection of nine different LED color/display settings. To activate the LED lights, press the "LIGHT" button on the topside panel one time. To advance to the next color/display setting, press the "LIGHT" button twice in a row. The LED's will go off with the first press, then back on in the next setting with the second press. If the LED's remain off for more than 5

Dynasty Spas MC-MP-DY4

heruntergeladen wurde: 0Dateigröße: 253 kb    Hersteller: Dynasty Spas  
Kategorie: Andere Home Zubehör

Water temperature is displayed. Water temperature in the spa has reached 112.F (44.C). Do not enter the water! Allow water to cool down. The system will reset au- tomatically when water reaches 109.F (43.C). Call your dealer or service supplier if problem persists. 3 flashing dots are dis- played. A problem has been de- tected. Do not enter the water! Check and open water valves. Clean filters if nec- essary. Check water level. Add water if needed. Shut power off and power your spa up again to r

Dynasty Spas MC-MP-DY2

heruntergeladen wurde: 1Dateigröße: 384 kb    Hersteller: Dynasty Spas  
Kategorie: Andere Home Zubehör

Not a bug but a feature! Our Smart Winter Mode protects your system from the cold by automatically turning the pumps on for one minute several times a day to prevent water from freezing in pipes. Water temperature is displayed. Water temperature in the spa has reached 112.F (44.C). Do not enter the water! Allow water to cool down. The system will reset au- tomatically when water reaches 109.F (43.C). Call your dealer or service supplier if problem persists. 3 flashing dots are dis- played. A pro





Kategorien