Connect your ADSL line to this port. 2 Power Inlet Connect the included power adapter to this inlet. Warning: Using the wrong type of power adapter may damage the ADSL Wireless Base Station. 3 Reset Button Use this button to reset the power and restore the default factory settings. To reset without losing configuration settings, see ‘Reset’ on page 28-29. 4 On/off Button to switch unit on/off. 5 LAN Ports 10/100 Ethernet ports (RJ-45). Connect devices on your local area network to thes

THE UNIT MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE UNIT. CAUTION: TO PREVENT ELECTRICAL SHOCK, THIS EQUIPMENT REQUIRES A GROUNDING CONDUCTOR IN THE LINE CORD. THE LINE CORD PROVIDED WITH THE EQUIPMENT IS ACCEPTABLE FOR USE WITH NEMA STYLE 5-15R AC RECEPTACLE SUPPLYING NOMINAL 120 VOLTS. DO NOT CONNECT THE PLUG INTO AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE PLUG CAN BE FULLY INSERTED WITH NO PART OF THE BLADES EX

4. On the Advance System Settings window select “OK” and select Hardware tab on System Properties. Select on “Windows Update Driver Settings.” 5. Then Windows Update Driver Settings will show select“Ask Me Each Time I connect a new Device” and press “OK”. 6. Close the Control Panel after completing steps 1 to 5. 7. After completing the post installation procedure you can insert the DVD Xpress DX2 CD to your CD-ROM drive 8. Browse the CD content by clicking Start then Computer5 2. A screen of “Fo

3 Technical Support: 562.926.4338 Technical Support Hours: M-F 8am-5pm, PST USBAV700Cover.p65 44 6/4/2002, 12:20 PM ADS Technologies North America Office 12627 Hidden Creek Way Cerritos, CA, 90703 Phone:562.926.1928 Technical Support:562.926.4338 Technical Support Hours: M-F 8am-5pm PST Fax:562.926.0518 European Office Shannon Industrial Estate Shannon Co. Clare, Ireland Phone: +353.61.702042 USB USB USB USB USB USB USB USB USB USB USB USBAV700Cover.p65 45 6/4/2002, 12:20 PM USB Instant DVD User

. . . . . . . . . 23 Still Image Capture . . . . . . . . . . . . . . . . 23 File Size Limitations . . . . . . . . . . . . . . . . 24 Saving Your Project . . . . . . . . . . . . . . . . 24 Saving Your Movie . . . . . . . . . . . . . . . . . 24 Sending Your Movie Back to Your Camcorder . . . . . . . . . . . 25 DV SmartPlay . . . . . . . . . . . . . . . . . . . . 26 It’s a Wrap . . . . . . . . . . . . . . . . . . . . . . 26 Tips for Smooth Video Capture . . . . . . . . . . 27 Audio Tips . . . . . .

All that is needed from you now is to click the “Finish” button. 2.) CAMCORDER DRIVER INSTALLATION 1. DO NOT PLUG YOUR CAMCORDER INTO THE PYRO BOARD UNTIL YOU HAVE INSTALLED THE CAMCORDER DRIVERS from PYRO CD #1. 2. Insert the PYRO 1394DV CD into your CD-ROM drive. INSTALL DRIVERS. The driver install will automatically install the correct version drivers to match your operating system. THE DRIVERS WILL INSTALL ONLY IF YOUR PYRO CARD IS INSTALLED FIRST. 3. If you have Windows ME or Windows 2000 i

8. You may now access your CD-ROM drive. PCMCIA Cable Installation Attach the PCMCIA cable “ MC 36 Connector” to your Addonics Pocket Drive firm and securely – you should not be able to disconnect the cable without pressing the release notch. Power Source Installation # Please refer to Text Box: MC-36 Pin Connector PCMCIA driver Installation For Windows 9X and Me 1. Plug the PCMCIA cable into your computer’s PCMCIA socket. You should see a “New hardware found” message box as shown. Click next to

The Compact Flash should be keyed to prevent the card from being incorrectly inserted. 2. Put the mechanism in the open position and slide the flat ribbon cable into the ZIF connector on the adapter. 3. Close the latch to secure the ribbon cable connection. 1.8” ZIF- CF adapter shown below attached to a 1.8” ZIF to 2.5” IDE converter 1.8” ZIF- CF adapter shown below connected to a 2.5” drive enclosure TECHNICAL SUPPORT Email: Internet: Technical Support (8:30 am to 6:00 pm PST) Phone: 4

All rights reserved. No part of this documentation or software may be reproduced or distributed in any form without prior written permission from ARESCOM, Inc. ARESCOM, Inc. has the right to make revisions and to change the contents of this document without any obligation to provide prior notice of such revisions and changes. ARESCOM, Inc. provides this documentation without any kind of warranty, either expressed or implied, including but not limited to the implied warranties of merchantability

Date/ Time SettingYou can change time setting from this page. Clicks “Apply” to save the setting. By default SNTP is set to Network Time Service otherwise select synchronize to PC. If internet access is available, we recommended setting SNTP to Network Time Service instead. IP Configuration By default, “IP Config” is set to “Automatic IP”. This will allow the NAS adapter to obtain its IP address automatically. If you prefer setting it manually, select the static IP option, enter your own value a