Traces of Coffee Grounds in New Machine? This is normal! Grinder was tested during assembly with beans. Despite cleaning, traces of ground coffee may be found. ON/OFFRinseCOFFEEREADYFourCoffeeButtonsALACarteRotaryDialwithPush-Button RED TEXT represents display text. A) First Time Ever Preparation 1. Fill water in tank and beans in bean container. 2. DO NOT install the Clearyl Filter Cartridge now! 3. Push the main power switch in the back of the machine. 4. Push the ON/OFF button in the display.

2. Run the Coffee Maker through a complete brewing cycle using the descaling solution. If the Coffee Maker has not been descaled for an extended period, run it through a second brewing cycle using fresh descaling solution. 3. Rinse the Coffee Maker by running it through two brewing cycles using fresh, cool water. 4. Wash the brew basket, brew basket insert, carafe, and carafe lid in hot, soapy water and rinse with hot water. These parts can also be washed in the upper rack of the dishwasher. 5.

When tamping, try to keep the tamper, wrist, and elbow in a straight line. 2. With the bottom of the portafilter resting on a solid surface, gently press the tamper into the coffee with the goal of creating a level surface. Remove the tamper from the filter basket with a slight twisting motion – this will help prevent the tamper from pulling up chunks of coffee. 3. After removing the tamper, some grinds may stick to the side of the filter basket. Tap the portafilter gently on the table to jostle

Indicator lights on the portable warming plate will show the current temperature selected. Turning Off the Warming Plates The coffee maker warming plate is on whenever the on/off indicator light is illuminated. To shut off the coffee maker, turn the AutoOn/ Off Switch clockwise to the “On/Off” position, then release. The portable warming plate is on whenever a temperature indicator light is illuminated. The portable warming plate can be shut off by turning the Temperature Switch clockwise to the

Part No. No. DESCRIPTION 1 Literature Parts Use And Care Guide 8204573 U.S. 8211624 Canada 8212131 Repair Parts List 2 8211572 O-Ring, Top 3 8211573 O-Ring, Bottom 4 Housing 8211525 Pearl Metallic 8212157 Nickel Pearl W10191122 Onyx Black 5 8211521 Pump Assembly 6 8211515 Base-Cover 7 8211516 Foot 8 Base 8211744 Pearl Metallic 8212158 Nickel Pearl W10191124 Onyx Black 9 8211582 Seal, Ring A 10 8211583 Seal Ring B 11 8211522 Mount, Hot Plate 12 8211518 Hot Plat

Part No. No. DESCRIPTION 1 Literature Parts Use And Care Guide 8204573 U.S. 8211624 Canada 8212131 Repair Parts List 2 8211572 O-Ring, Top 3 8211573 O-Ring, Bottom 4 Housing 8211525 Pearl Metallic 8212157 Nickel Pearl W10191122 Onyx Black 5 8211521 Pump Assembly 6 8211515 Base-Cover 7 8211516 Foot 8 Base 8211744 Pearl Metallic 8212158 Nickel Pearl W10191124 Onyx Black 9 8211582 Seal, Ring A 10 8211583 Seal Ring B 11 8211522 Mount, Hot Plate 12 8211518 Hot Plat

JOSEPH MICHIGAN 49085 11-08 Litho in U.S.A. (skr) (eeb) ©2008 KITCHENAID Part No. 8212131 Rev. E BASE AND HOUSING PARTS For Models: KPCM050_ _0, 4KPCM050_ _0 rs, 8212131 FOR ORDERING INFORMATION REFER TO PARTS PRICE LIST 2 BASE AND HOUSING PARTS For Models: KPCM050_ _0, 4KPCM050_ _0 Illus. Part No. No. DESCRIPTION 1 Literature Parts Use And Care Guide 8204573 U.S. 8211624 Canada 8212131 Repair Parts List 2 8211572 O-Ring, Top 3 8211573 O-Ring, Bottom 4 Housing 821152

Many experts recommend buying beans roasted no darker than a medium roast, the color of which appears as an even chocolate brown. This roast preserves the natural sugars and flavor of the bean, and sets the stage for an excellent cup of coffee. A medium roast is the darkest a bean can be roasted without oils developing on the surface. ADVICE FOR GREAT TASTE Darkly roasted beans – which appear dark brown or nearly black – look great, but the extra roasting will overwhelm the more delicate coffee

CARE AND CLEANING 29 TROUBLESHOOTING • If the mill does not run when switched on: Check to see if the mill is plugged into a grounded 3 prong outlet. If it is, unplug the mill, then plug it back in again. If the grinder still does not work, check the fuse or circuit breaker on the electrical circuit the mill is connected to and make sure the circuit is closed. If the mill does not run after taking these steps, a foreign object may be jamming the cutting burrs. See “Cleaning the Cutting Burrs” on