Part No. No. DESCRIPTION 1 7 2 5 21 8 Filter Housing & Ring Assembly 2 Cover, Filter 8211528 Pearl Metallic 8212154 Nickel Pearl W10191127 Onyx Black 3 8211520 Guide, Water 4 8211530 Cover, Water Guide 5 Cover, Top 8211529 Pearl Metallic 8212155 Nickel Pearl W10191126 Onyx Black 6 8211746 Seal, Water Reservoir 7 8211531 Cover, Water Reservoir 8 8211533 Water Reservoir 9 Holder, Water Reservoir 8211534 Pearl Metallic 8212156 Nickel Pearl W10191123 Onyx Black 10 821

Z To protect against fire, electric shock and injury to persons, do not immerse cord, plugs, or body of machine in water or other liquid. Z Do not touch hot surfaces. Use handles or knobs. Z Close supervision is necessary when any appliance is used by or near children. Z Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts. Z Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in

Your milk froths up. STEAM INTAKE When the required amount of froth has been attained push selector key anew. COFFEE READY E 11 With the flow-adjustment you can set the optimum frothing. Turn the handle slightly to the right or to the left until you obtain the required result. 11.3 Drawing off hot milk using the Auto-Cappuccinatore S9 The Auto-Cappuccinatore of the S9 can be used to draw off hot milk. Adjust the selector lever (1) (Fig. 10) to position (3) to draw off hot milk. Install the Au

• Once you have enough hot water in your cup push the Hot Water Button again. The display shows CONFIRMED 4. COFFEE READY 26. PROGRAMMING / MAINTENANCE The Z5 provides programming, maintenance and look-up functions. With the display at COFFEE READY you can access these functions as follows: • Push and hold the Rotary Dial until you hear a beep and the display shows FILTER. The Z5 offers the following Functions (see adjacent chart) Turn the dial clockwise slowly to scroll through Functions. Pleas

ENA 5 only: When using two cups, make sure the coffee spout is turned to the 2-cup position (Fig. 10). 9d. OVERRIDING CUP SIZE AND COFFEE STRENGTH If you want to brew a different cup of coffee just once you can override the propgrammed strength and volume before brewing. This is convenient when you desire a stronger or milder cup of coffee or a guest wants the coffee prepared differently. • Turn the Rotary Dial. It will show you the following options: MILD, NORMAL, STRONG, STEAM, 2 CUPS. If you

The IMPRESSA recognizes when you should run a decalcifying cycle. The machine will still make coffee, hot water and steam. However, we recommend that you should decalcify the machine (see Chapter 16) within the next few days. SELECT PRODUCT / DE-SCALE MACHINE After a while the display will change. You should run the decalcifying cycle now (see Chapter 16). SELECT PRODUCT / DE-SCALE NOW 15.10 Emptying the system Requirements: The IMPRESSA has been switched off with the ON / OFF key (11), but the

62515 03/01 The Impressa E30 is identical in construction and engineering with the Impressa E50/E55 mentioned in the operating instructions. Jura Elektroapparate AG, CH-4626 Niederbuchsiten, Internet Kundendienst Telefon 062 389 82 33 Fig. 1 Fig. 4 Fig. 7 Fig. 2 Fig. 5 Fig. 8 Fig. 3 Fig. 6 Fig. 9 1 2 Fig. 1 Fig. 4 Fig. 7 Fig. 2 Fig. 5 Fig. 8 Fig. 3 Fig. 6 Fig. 9 1 2 Instructions for use Jura Impressa E50/E55 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 7 8 9 10 11 12 13 14 15 16 17 6

This draw-off of espresso / strong coffee is only possible for 1 cup. 7.2 Drawing off espresso/extra coffee Place 1 cup under the coffee-spout (9) . Press the draw-off symbol until three dots light up to the left of the symbol. This draw-off of espresso / extra coffee is only possible forselector switch. The 1 cup. 7.3 Drawing off powder coffee Press the and symbols light up. Now put 1 or 2 level measuring spoons of pre-ground coffee into the filler funnel for pre-ground coffee (10). Place

The , symbols light up. Empty the drip tray and the grounds container and put both of them back in again. The symbol goes off and the , symbols light up. Completely dissolve the contents of one blister (2 tablets) in 0.5 litres of water in a vessel and pour the mixture into the water tank. Put the tank back in again. The symbol appear. Turn the selector switch for hot water/steam (12) to the position . The symbol go off and the , symbols light up. Place a sufficiently large vessel under the