9 Video Input Video System Selection 1 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. 2 2 Use the Point ed buttons to move the red arrow pointer to the desired system and then press the SELECT button. Video Jack or S-Video Jack Auto AV SySTEM MENU (VIDEO OR S-VIDEO) The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. PAL/SECAM/NTSC/NTSC4 4 /PAL-M/P

. • PC Adjust Menu cannot be selected when Input 1[RGB (PC digital)] is selected in the Input Menu (p.35). Image Level Selection Image Level Selection Press the MENU button to display the On-Screen 1 Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Menu icon. Use the Point ed buttons to move the red frame 2 pointer to the desired image level and then press the SELECT button. Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projec

OWNER’S MANUAL Features and Design . Compact Design This projector is designed compact in size and weight. It is easy to carry and installed anywhere you wish to use. . Functionally Rich This projector has many useful functions such as lens shifting, ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc. . Multi-use Remote Control Use the remote control as wired and wireless, or as a PC wireless mouse. Eight remote control codes and selectable pointe

AUTO IMAGE FUNCTION Press the AUTO IMAGE button on the remote control unit or on the projector. The item(s) indicated “ON” in the AUTO IMAGE FUNCTION are adjusted automatically. If all the items in AUTO IMAGE FUNCTION are “OFF”, AUTO IMAGE SETTING display appears. If you wish to operate the AUTO IMAGE FUNCTION, perform the steps 3 - 9 of “AUTO IMAGE FUNCTION” section on page 39. MENU OPERATION In MENU OPERATION mode, you can adjust the projector. You can use the TOP CONTROL OF THE PROJECTC or th

REMOTE CONTROL BATTERY INSTALLATION USING THE REMOTE CONTROL UNIT Point the remote control toward the projector (Receiver widow) whenever pressing the buttons. Maximum operatingrange for the remote control is about 16.4’ (5 m) and 600 front and rear of the projector. To insure safe operation, please observe the following precautions: •Use (2) AA type alkaline batteries. •Change two batteries at the same time. •Do not use a new battery with a used battery. •Avoid contact with water. •Do not drop

This ma y cause damage to the projector. I n st a l l a t i o n Turning on the Projector POWER Remove the lens cover. Connect the projector’s power cable with the projector, and insert the power cable into a wall socket. Turn on the AC power switch of the projector. The power indicator lights green and slowflashing. Projector works in standby mode. Press the power button to turn on the projector. The power LED begins to green and lamp LED begins to red, and the projector will be lamped on. Insta

Press the POINT LEFT/RIGHT buttons to select INPUT SOURCE and press the SELECT button. Another dialog box INPUT SOURCE Menu will appear. 2 Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the INPUT source that you want to select, and then press the SELECT button. When connecting to those equipment, select the type of Input source in INPUT SOURCE Menu. 1 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select INPUT SOUR

. Model No. of your projector LC-XS25/LC-XS30 . Replacement Filter Cartridge Service Parts No. 610 339 7665 Connect the AC power cord to the projector and turn on the projector. 7 Maintenance and Care CLOSE handle OPEN handle 1 2 3 4 5 6 Maintenance and Care Resetting the Filter Counter Be sure to reset the Filter counter after replacing the filtercartridge. Press the MENU button to display the On-Screen 1 Menu. Use the Point <> buttons to move the red frame pointer to the Setting Menu icon. 2 U