Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Eiki Dateigröße: 3.18 mb Dateiname: Unterrichtssprache:

. • PC Adjust Menu cannot be selected when Input 1[RGB (PC digital)] is selected in the Input Menu (p.35). Image Level Selection Image Level Selection Press the MENU button to display the On-Screen 1 Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Menu icon. Use the Point ed buttons to move the red frame 2 pointer to the desired image level and then press the SELECT button. Dynamic For viewing pictures in a bright room. Standard Normal picture mode preset on the projector. Real Picture mode with improved halftone for graphics. (This icon is displayed with the computer signal.) Cinema Picture mode adjusted with fine tone. (This icon is displayed with the video signal.) Image 1–4 For viewing with the user preset image level in the Image Adjust Menu (see page 44). Image Menu icon Image Menu Move the red frame pointer to the desired image level and press the SELECT button. This will change to Cinema mode icon with the video signal input. The selected image level is check marked. Image Adjustment Image Adjustment Press the MENU button to display the On-Screen 1 Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. Use the Point ed buttons to move the red frame 2 pointer to the desired item and then press the SELECT button to display the adjustment dialog box. Use the Point 7 8 buttons to adjust the setting value. Contrast Press the Point 7 button to decrease the contrast; press the Point 8 button to increase the contrast (from 0 to 63). Brightness Press the Point 7button to decrease the brightness; press the Point 8 button to increase the brightness (from 0 to 63). Color Press the Point 7button decrease the intensity of the color; press the Point 8button increase the intensity of the color (from 0 to 63). Tint Press the Point 7 8buttons to adjust the tint value to get a proper color balance (from 0 to 63). Color temp Use the Point 7 8 buttons to select the desired Color temp. level (High, Mid, Low, or XLow). White balance (Red) Press the Point 7 button to lighten red tone; press the Point 8 button to deepen red tone (from 0 to 63). White balance (Green) Press the Point 7 button to lighten green tone; press the Point 8 button to deepen green tone (from 0 to 63). White balance (Blue) Press the Point 7 button to lighten blue tone; press the Point 8 button to deepen blue tone (from 0 to 63). .Notes: • When the White balance Red, Green, or Blue is adjusted, the Color temp. level will change to “Adj.”. • Tint cannot be selected when the video system is PAL, SECAM, PAL-M, or PAL-N (p.36). • Each input signal has different On-Screen Menu display. *The figure below shows for video signal input. Image Adjust Menu Use the Point 7 8 buttons to adjust the setting value. Move the red frame pointer to the desired item and then press the SELECT button. Press the SELECT button at this item to display other items. Image Adjust Menu icon Press the SELECT button here to display the previous items. 4 Image Adjustment Sharpness Press the Point 7 button to decrease the sharpness of the image; press the Point 8 button to increase the sharpness of the image (from 0 to 15). Gamma Use the Point 7 8 buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15). Noise reduction Noise interference on the screen can be reduced. Select one of the following options to get smoother images. Off ......... Disabled. L1 .......... Lower reduction L2 .......... Higher reduction Progressive An interlaced video signal can be displayed in progressive mode. Select one of the following options. Off ......... Disabled. L1 .......... For an active picture. L2 .......... For a still picture. Film........ For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. .Notes: • Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i, or 1080i is selected (p.36). • Reset and Store icons will be displayed when more than one adjustment is made. 4 Image Adjustment Reset To reset the adjusted data, select Reset and press the SELECT button. A confirmation box appears and then select Move the red frame [Yes]. All adjustments will return to their previous figures. Store To store the adjusted data, select Store and press the SELECT button. Use the Point ed buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select [Yes]. Stored data can be called up by selecting an “Image (1–4)” in the Image Level Selection on page 41. Quit A confirmation box appears and then Exit the Image Adjust Menu. Image Level Menu pointer to an image item to be set and then press the SELECT button. Store icon select [Yes]. Screen Adjustment Screen Adjustment Press the MENU button to display the On-Screen 1 Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. Use the Point ed buttons to move the red frame 2 pointer to the desired function and then ...

Herunterladen

Geben Sie zwei Ziffern: