Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
9 Video Input Video System Selection 1 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the AV System Menu icon. 2 2 Use the Point ed buttons to move the red arrow pointer to the desired system and then press the SELECT button. Video Jack or S-Video Jack Auto AV SySTEM MENU (VIDEO OR S-VIDEO) The projector automatically detects an incoming video system, and adjusts itself to optimize its performance. PAL/SECAM/NTSC/NTSC4 4 /PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. y, Pb/Cb, Pr/Cr Jacks Auto The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance. When the Video System is 1035i or 1080i, select the system manually. COMPONENT VIDEO SIGNAL FORMAT If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, and 1080i. .Note: •The AV System menu cannot be selected when selecting RGB(Scart). AV System Menu icon The selected system is displayed Move the pointer to the desired system and press the SELECT button. AV SySTEM MENU (COMPONENT VIDEO) AV System Menu icon The selected system is displayed. Move the pointer to the desired system and press the SELECT button. Video Input Image Level Selection Direct Operation Side Control Press the IMAGE SEL. button on the remote control or MENU LENS SHIFT on the side control to select the desired image level. Standard Cinema Image1 SELECT IMAGE SEL button AUTO PC ADJ. IMAGE SEL. Remote Control • • • Image 10 Menu Operation 1 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Select Menu icon. 2 2 Use the Point ed buttons to move the red frame pointer to the desired image level and then press the SELECT button. Standard Normal picture level preset on the projector. Cinema Picture level adjusted with fine tone. IMAGE 1–10 User preset picture adjustment in the Image Adjust Menu. (p. 46) IMAGE SEL button IMAGE SELECT MENU Image Select Menu icon Move the red frame pointer to the desired level and press the SELECT button. Video Input Screen Size Adjustment 1 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Screen Menu icon. 2 2 Use the Point ed buttons to move the red frame pointer to the desired function and then press the SELECT button. Normal Provide the image at the normal video aspect ratio of 4:3. Wide Provide the image at the wide screen ratio of 16:9. Custom Adjust the screen scale and position manually with this function. Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds. To display the Aspect dialog box, press the SELECT button at Custom again and then the Aspect dialog box appears. Scale H/V.............. Adjust the Horizontal/Vertical screen scale. H&V...................... When set to “On,” the aspect ratio is fixed. The “Scale V” appears dimmed and becomes unavailable. Adjust “Scale H,” then the screen scale is automatically modified based on the aspect ratio. Position H/V.......... Adjust the Horizontal/Vertical screen position. Common .............. Save the adjusted scale to all the inputs. Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used. Reset.................... Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.” SCREEN MENU Move the red frame pointer to the desired function and press the SELECT button. Screen Menu icon .Note: • Widecannotbeoperatedwhen“720p,”“1035i,” or“1080i”isselectedonAVSystemMenu(p.40). Press the SELECT button at Common or Reset, to display a confirmation box. .Note: • When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears. • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal. 4 Video Input Keystone SCREEN MENU This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point 7 8 buttons to switch between each option. Store. . . Keep the keystone correction even when the AC power cord is unplugged. Reset . . Release the keystone correction when the AC power cord is unplugged. To correct keystone distortion, press the Select button. The Keystone dialog box appears. Use the Point ed7 8 buttons to correct keystone distortion. (p.29) Move the red frame pointer to a function and press the SELECT button. Ceiling Ceiling When this function is set to “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear Rear When this functio...
Dieses Handbuch ist für folgende Modelle:Fernseher - Multimedia Projector LC-XT5 (2.61 mb)