Stimmen - 0, Durchschnittliche Bewertung: 5 ( )

Hersteller: Planar Dateigröße: 3.96 mb Dateiname: Unterrichtssprache:

3. To adjust the angle of the picture, turn the tilt adjuster [D] right or left until desired angle has been achieved. Adjusting the Zoom, Focus and Keystone 1. Use the Image-zoom con- trol (on the projector only) to resize the projected im- age and screen size. B 2. Use the Image-focus con- trol (on the projector only) to sharpen the projected image A. 3. Press the Keystone button on the remote control. The keystone control ap- pears on the display. 4. Use the Keystone button to correct image distor- tion. Adjusting the Volume 1. Press the Volume +/- but- ton on the remote control. The volume control ap- pears on the display. 2. Use the Volume +/- but- ton to adjust the level. 3. Press the Mute button to turn off the volume. (For remote only) ON-SCREEN DISPLAY (OSD) MENU SETTINGS OSD Menu Controls The projector has an OSD that lets you make image adjustments and change various settings. Navigating the OSD You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The following illustration shows the corresponding buttons on the re- mote control and on the projector. 1. To open the OSD, press the Menu button. 2. There are six menus. Press the cursor but- ton to move through the menus. 3. Press the cursor button to move up and down in a menu. 4. Press to change values for settings, and then press Enter or to confirm the new set- ting. 5. Press Menu to close the OSD or leave a sub- menu. Note: Depending on the video source not all items in the OSD are available. For example, the Horizon- tal/Vertical Position items in the Setup menu can only be modified when connected to a PC. Items that are not available cannot be accessed and are grayed out. Setting the OSD Language You may want to reference the OSD on your projector while reading this section. Set the OSD lan- guage to your preference before continuing. (The default language is English.) 1. Press the Menu button. The Main menu appears. 2. Press the cursor button until Tool is highlighted. 3. Press the cursor button until Tool is highlighted. 4. Press the button until your language is displayed. 5. Press the Menu button twice to close the OSD. Setting the OSD Language Use the following illustration to quickly find a setting or determine the range for a setting. Main Menu Press the Menu button to open the OSD menu. Press the cursor button to move to the Main menu. Press the cursor button to move up and down in the Main menu. Press to change values for settings, and then press Enter or to confirm the new setting. ITEM DESCRIPTION DEFAULT Brightness Press the cursor button to adjust the brightness. (Range: 0 – 100) 50 Contrast Press the cursor button to adjust the contrast. (Range: 0 – 100) 50 Sharpness Press the cursor button to adjust the display sharpness (Range: 1-5) 3 Color Temperature Press the cursor button to adjust the color temperature. (Range: Cool/Normal/Warm) Normal Color Saturation Press the cursor button to adjust the video saturation. (Range: 0 – 100) 50 Color Tint Press the cursor button to adjust the video tint/hue. (Range: 0 – 100) 50 Gamma Press the cursor button to adjust the gamma correction of the display. Input Gamma PC 2.2 MAC 1.8 Video 2.4 Chart 2.2 B&W 2.4 Data source: PC Video source: Video Color Space Press the cursor button to adjust the color space. (Range: Auto – RGB – YPbPr- YCbCr) Auto Reset Resets all Main settings to default values — Main Menu Functions Available for Connected Source Function RGB DVI Component Video Composite Video S-video Brightness x x x x x Contrast x x x x x Sharpness x x x x x Color Temp x x x x x Color Saturation x x x Color Tint x x x Gamma x x x x x Color Space x x x x x Reset x x x x x x = available to video source Setup Menu Press the Menu button to open the OSD menu. Press the cursor button to move to the Setup menu. Press the cursor button to move up and down in the Setup menu. Press to change values for settings, and then press Enter or to confirm the new setting. ITEM DESCRIPTION DEFAULT Horizontal Position Press the cursor button to move the image left or right. (Range: 0 – 100) 50 Vertical Position Press the cursor button to move the image up or down. (Range: 0 – 100) 50 Keystone Press the cursor button to correct distortion of the projected image. (Range: -50 – +50) 0 Aspect Ratio Press the cursor button to toggle between the 4:3 standard format and the 16:9 High Definition TV (HDTV) format. 4:3 Advance Feature See “Advance Feature” on page 24. — Reset Resets Keystone and Aspect Ratio to default values — Setup Menu Functions Available for Connected Source Function RGB DVI Component Video Composite Video S-video H Position x V Position x Keystone correction x x x x x Aspect Ratio x x x x x Advance Feature x x x x x Reset x x x x x x = available to video source Advance Feature Press the Menu button to open the OSD menu. Press to move to the Setup menu. Press to move to the Advance Feature menu and then press Enter or . Pres...

Herunterladen

Geben Sie zwei Ziffern: