(From 0 to 31) Total dots Adjusts the number of total dots in one horizontal period. Press the Point Left/Right button and adjust number to match your PC image. Horizontal Adjusts horizontal picture position. Press the Point Left/Right button to adjust the position. Vertical Adjusts vertical picture position. Press the Point Left/Right button to adjust the position. Current mode Press the SELECT button to show the information of the connected computer. Clamp Adjusts clamp level. When the image h

Press the SELECT button at Common to display a confirmation box. To save the scale, press the SELECT button at “Yes.” When Custom is selected, the saved scale is used. Reset ................. Reset the all adjusted values. Press the SELECT button at Reset to display a confirmation box. To reset, press the SELECT button at “Yes.” For zooming in and out the images Digital zoom + Select Digital zoom +. The On-Screen Menu disappears and “D. zoom +” appears. Press the SELECT button to expand the imag

ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 XGA 10 1024 x 768 62.04 77.07 VGA 2 720 x 400 31.47 70.09 XGA 11 1024 x 768 61.00 75.70 VGA 3 640 x 400 31.47 70.09 XGA 12 1024 x 768 35.522 86.96 (Interlace) VGA 4 640 x 480 37.86 74.38 XGA 13 1024 x 768 46.90 58.20 VGA 5 640 x 480 37.86 72.81 XGA 14 1024 x 768 47.00 58.30 VGA 6 640 x 480 37.50 75.00 XGA 15 1024 x 768 58.03 72.00 VGA 7 640 x 480 43.269 85.0

Press the POINT LEFT/RIGHT buttons to select IMAGE 0 and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to change by pressing the POINT UP/DOWN buttons. To change the value, press either the POINT RIGHT button or the POINT LEFT button. Fine sync. Adjust the picture as necessary to eliminate fUcker from the display. (From 0 to 255.) Total dots The num

Features ···························································································2 3. Operation notice···········································································3 4. Projector figure·············································································4 4.1 Function list of control panel 4 5. Accessories····················································································7 5.1 Remote control 8 5.2 Function list of remote control panel 9 6.

KE6-X7100 KE6-X71L00 LC-X71 LC-X71L (LENSLESS) Give complete “Chassis No.” for parts order or servicing, it is shown on the rating sheet on the cabinet on the projector. FOREWORD For your convenience, all service parts, identified in this manual are available through Eiki’s normal distribution channels. In addition to service part number, the generic descriptions have been given, where possible, to allow your service technicians to substitute equivalent components which might be available from o

Image Projection Image Projection Displaying the Black Screen This function allows you to temporarily display the black screen. 1 BLACK SCREEN Press . button 2 ЎProjected Image Pressing again will turn the projected image back on. Displaying and Setting the Break Timer This function allows you to show the remaining time for break during meeting. 1 Press . 2 While “ ” is displayed, press ', ", \ or | to set the break timer. • You can set anywhere between 1 and 60 minutes (in 1 units). • The break

REMOTE CONTROL BATTERY INSTALLATION USING THE REMOTE CONTROL UNIT Point the remote control toward the projector (Receiver widow) whenever pressing the buttons. Maximum operatingrange for the remote control is about 16.4’ (5 m) and 600 front and rear of the projector. To insure safe operation, please observe the following precautions: •Use (2) AA type alkaline batteries. •Change two batteries at the same time. •Do not use a new battery with a used battery. •Avoid contact with water. •Do not drop

Blicken Sie daher nicht in das Senderfenster der Fernbedienung und richten Sie den Laserstrahl nicht gegen sich selbst oder gegen andere Leute, weil Augenschaden verursacht werden konnen. Dieser Projektor mu. wie vorgeschrieben aufgestellt werden, weil sonst die Gefahr eines Brandausbruchs vorhanden ist. Falls Sie den Projektor fur langere Zeit nicht in Betrieb nehmen, sollten Sie den Netzstecker aus der Steckdose ziehen. BEWAHREN SIE DIESE BEDIENUNGSANLEITUNG ZUM SPATEREN NACHSCHLAGEN SORGFALTI

Jack (3.5mm) Remote pause jack (2.46mm) OPTIONAL ACCESSORIES 3279A Standard headset Remote control microphone Specifications Type Frequency Response Wow & Flutter Battery or AC Operation Remote Microphone Jack Auxilary Input Jack Remote Pause Headset Jacks Audio Output: Portable AC/battery recorder player 125Hz to 8 KHz 0.30% AC/DC (6"C") 1/8" (3.5mm x 1) 1/8" (3.5mm x 1) 1/10" (2.46 mm) x 1 %" x 4 Amplifier 1 Watts RMS (D.H.T. 5%) Signal To Noise Ratio Audio: Output Speaker Jacks Dimens