Bewertungen
Herunterladen
Check the battery icon on the LCD to see the battery charge level. When replacing the batteries, always use good quality Ni-MH AAA re-chargeable batteries. Charging the Handset 1. Place the handset into the base. The LCD screen will light up and you will hear a beep to indicate charging has begun. 2. Important: Before initial operation, you should fully charge the handset for at least 15 hours. 3. After the batteries are fully charged, begin the registration process as described on page 9. When
try not to have the battery come in contact with conducting materials such as rings, bracelets and keys. The battery or conduction material may overheat and cause burns. Observe proper polarity 5. orientation. NOTE: Please check that your telephone equipment is UL/ETL approved before connecting the ClearSounds CLA7v2 into the headset jack. Please refer to your owners manual or contact the telephone manufacturer. Installing the Batteries IMPORTANT: The CLA7v2 needs to be disconnected from the tel
Please Note: This product is best used if the line of sight is clear. Make sure the TV transmitter is in clear view and not tucked away in a cabinet or blocked in any way. Package Contains: I transmitter & AC adapter, I headset receiver. 7 audio jacks, external microphone and user manual. ClearSounds“ Hear how good life can be Maximum Amplification Controls Background Noise 1.800.965.9043 8160 S. Madison Street, Burr Ridge, IL 60527 ©2008, ClearSounds
NOTE: Your ClearSounds® CSC500 comes from the factory preset in the OFF position. If you would like to override the factory preset, simply change the selection on the back of the phone to ON. - Ringer Setting You can adjust the ringer of your phone as high as 85 dB. The ringer volume level can be adjusted by sliding the switch on the back side of the phone. Ringer options include HI, LO and OFF. Please Note: Your phone is also equipped with a visual flasher that automatically flashes when the ph
4. The LCD shows the current Remote code. Enter the new code you would like to set up and then press the OK soft key. Remote Access You can access many features of your answering machine remotely from any touch tone phone. A four-digit security Remote code is required to access the system and the factory default code is 0000. To enter remote access: 1. Dial your phone number from any touch tone phone. 2. When the Announce1/Announce2 message starts to play, you may enter the remote access mode by
It is important to instruct all potential users of its proper operation. It is advised to adjust the volume control to its minimum level (Lo) while not in use and alert other users that hearing damage can potentially result from misuse. WARNING: To avoid the possibility of electrical shock, do not use this product near water (For example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool) while in the bathtub or shower or when you are wet. If the p
4 Important Safety Instructions ............................... pg. 4-6 Location of Controls ............................................... pg. 7-9 Keys Descriptions ....................................................pg. 10 Installation Steps ..............................................pg. 11-14 BASIC TELEPHONE FUNCTIONS Amplification .....................................................pg. 14-15 Ringer Setting ....................................................pg. 16-17 Visual Indicator ..
To change the language used for your Caller ID display: In the hook position, 1. Press the MUTE button to access the Programming Menu. 2. Using the or arrow buttons, highlight/select <
This manual is designed to familiarize you with the A50E Expandable Handset setup, registration and basic functions. For detailed operational instructions, please refer to the ClearSounds A50 User Manual. Keep this manual for future reference. Please save your sales receipt as proof of purchase in the event you need warranty service. Please visit our web site at to: ■ Register your product It’s easy! Click on the Warranty Registration Tab, Complete the form and click “submit”. It’s that simp