TOUGH Extra Large 16cc HydroGear® Pumps deliver faster ground speed and superior responsiveness to operator inputs. All the hydraulic system components are sized to provide long life. TOUGH Proven Engines: 25-hp Kawasaki® fH721V 25-hp Kohler® Command™ Pro 27-hp Kohler® Command™ Pro 28-hp Kohler® Command™ Pro EfI 30-hp Kohler® Command™ Pro All with world-wide reputation for reliability. Just Some Of The Bush Hog® TOUGH Features PROFESSIONAL SERIES Model Engine & Deck PZ2555 25 HP Kawasaki® FH72IV

THEREFORE, THIS CUTTER IS NOT TO BE OPERATED ALONG HIGHWAYS OR IN ANY AREA WHERE PEOPLE MAY BE PRESENT UNLESS ALL SIDES OF THE UNIT ARE ENCLOSED BY PERMANENT BANDS, SAFETY CHAINS, OR OTHER FACTORY APPROVED SAFETY SHIELDS THAT ARE IN GOOD REPAIR. CEASE MOWING WHENEVER ANYONE COMES WITHIN THE OPERATING AREA. 3-4 TRANSPORTING When implement is transported on road or highway, day or night, use tractor flashing warning lights unless prohibited by law. A slow moving vehicle (SMV) sign must be visible

5 (540 RPM - Pull and Semi-Mount) Cross Shaft ASAE Cat. 4 Rubber Element ASAE Cat. 5 Rubber Element Gearbox HP (3) 205 Center, 190 Outboards (2) 205 Main, 190 Outboard Tractor PTO Speed 540 RPM 540 RPM Driveline Protection 4 Plate PTO Slip Clutch 4 Plate PTO Slip Clutch Height Adjustment Manual or Hydraulic Manual or Hydraulic Blade Holder(s) Round Round Blades 1/2 x 4 inches - Uplift 1/2 x 4 inches - Uplift Blade Tip Speed 15,176 FPM 15,176 FPM Tires Laminated, Pneumatic, Aircraft Lami

II & III Standard & Quick Hitch, Cat. II & III (Semi-Mount) and Center Pull Self Leveling Cutting Height 2 to 13 inches Deck Thickness 10 gauge Side Bands 1/4 x 10 inches Minimum Tractor HP 90 PTO (Lift), 75 PTO (Pull) Driveline ASAE Cat. 5 (For 540 RPM Lift, Pull and Semi-Mount), ASAE Cat. 4 (For 1000 RPM Pull Models) Cross Shafts ASAE Cat. 5 Rubber Element or Optional Cat. 4 Shear Pin/Rubber Element Gearbox HP (3) 205 - Center, 190 - Outboard Tractor PTO Speed 540/1000 RPM Driveline P

ion Slip Clutch Standard Slip Clutch Standard Slip Clutch Standard Blade Holder(s) Round Round Round Blades 1/2 x 4 inch uplift 1/2 x 4 inch uplift 1/2 x 4 inch uplift Blade Tip Speed 15,551 FPM 14,877 FPM 14,514 FPM Tires Laminated Laminated Laminated, dual or single Minimum Tractor HP 30 PTO 40 PTO 50 PTO Front and Rear Deflectors Standard Equipment - Front Belting and Rear Bands, optional chain shielding, all 3 models Approximate Weight 785 lbs 942 lbs 1127 lbs Warranty 1 ye

1530 lbs. 2900 lbs. VV. Rollback Force at Maximum Height 31.5” Forward of Pivot Pin 1935 lbs. 1625 lbs. 2300 lbs. XX. Rollback Force at 59” Height 31.5” Forward of Pivot Pin 2300 lbs. 2020 lbs. 3400 lbs. ZZ. Rollback Force at Ground Level 31.5” Forward of Pivot Pin 1700 lbs. 1680 lbs. 2800 lbs. Raising Time - Ground Level to Full Height 3.5 sec. 3.8 sec. 5 sec. Lowering Time - Full Height to Ground 2.5 sec. 2.3 sec. 3 sec. Bucket Dumping Time -Full Rollback to Full Dump 4.0 sec. 3.3 sec. 4 sec.

earing On Roller TOUGH Powder Coat Paint PVB-600 models working width approximate weight single roller models PVB-600 60 inches 530 lbs PVB-660 66 inches 560 lbs PVB-720 72 inches 590 lbs PVB-840 84 inches 650 lbs PVs-600 60 inches 530 lbs PVs-660 66 inches 560 lbs PVs-720 72 inches 590 lbs PVs-840 84 inches 650 lbs double roller models PVB-602 60 inches 640 lbs PVB-662 66 inches 680 lbs PVB-722 72 inches 720 lbs PVB-842 84 inches 790 lbs PVs-602 60 inches 640 lbs P

n Always make sure the cutting attachment shield is properly installed before operating this unit. Operating Units with a Blade The blade rotates counter-clockwise. For best performance and to minimize being stuck by debris, move the blade from right to left while advancing on your work. Position the blade so cuts are made between the blade’s 8 o’clock and 10 o’clock positions (as viewed from above). DO NOT cut between the 10 o’clock and 5 o’clock positions. WARNING! When cutting wood with a saw

4020 380 Art. 4023 GB Operating Instructions Cylinder Lawnmower F Mode d’emploi Tondeuse helicoidale NL Gebruiksaanwijzing Kooimesmaaier S Bruksanvisning Handgrasklippare I Istruzioni per l’uso Rasaprato a mano E Manual de instrucciones Cortacesped helicoidal P Instrucoes de utilizacao Cortador de relva cilindrico DK Brugsanvisning Handpl.neklipper DGBFNLSIEPDK GARDENA Cylinder Lawnmower 300 / 380 Welcome to the Garden of GARDENA... GB Please read these operating instructions carefully and obser