(Default value) Disabled Disable onboard 1st channel IDE port. OnChip SATA Controller Enabled Enable onboard SATA function. (Default value) Disabled Disable onboard SATA function. OnChip SATA Type Native IDE Set the SATA channel to Native IDE mode.(Default value) RAID Set the SATA channel to RAID mode. Legacy IDE Set the SATA channel to Legacy IDE mode. SATA..AHCI Set the SATA channel to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage dr

1.00 Contents Safety Information..........................................................................................................4 Technical Support............................................................................................................5 Conventions Used in This Guide....................................................................................5 Packing List.........................................................................................................

All rights reserved. The contents of this document are provided in connection with Advanced Micro Devices, Inc. (“AMD”) products. AMD makes no representations or warranties with respect to the accuracy or completenessof the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this publicatio

NOTICE SYMBOL Registered marks notice symbol. All product and product feature names is claiming trademark rights or for which application should “™” notice symbol. the Chipset Marketing to ensure you Logos and Text Treatment Using AMD CrossFireChipset Logos Use AMD CrossFireChipset logos when promoting motherboards or systems with these chipset. The logos must be used in the following applications: • On the heat sink for Northbridge. • On the PC boot up screen (BIOS Splash) • On retail packaging

To connect an AC97 front panel audio module to this connector, please refer to the instructions on Page 76 about the software settings. HD Audio: AC'97 Audio: 2 1 10 9 Pin No. Definition 1 MIC 2 GND 3 MIC Power 4 NC 5 Line Out (R) 6 NC 7 NC 8 No Pin 9 Line Out (L) 10 NC Pin No. Definition 1 MIC2_L 2 GND 3 MIC2_R 4 -ACZ_DET 5 LINE2_R 6 FSENSE1 7 FAUDIO_JD 8 No Pin 9 LINE2_L 10 FSENSE2 GA-M61P-S3 Motherboard - 24 - English 11) CD_IN (CD In Connector) Connect CD-ROM or DVD-ROM audio out to the conn

37 B.1 BIOS Auto Flash Tool................................................................37 B.2 Flash Method..............................................................................37 Appendix C ............................................. 38 Appendix D ....................................... 42 -4- LE-366 User’s Manual (The Page is Left For Blank) -5- LE-366 User’s Manual Chapter 1 1.1 LE-366 is the Mini-ITX mothe

Because the processor-mounting surface extends above the surface of the cam box on the socket, the heat sink bottom can be flat. The heat sink must have a flat surface of at least 40 mm x 40 mm, centered over the processor. Figure 11 shows the measured thermal performance vs. flow rate for this heat sink. This data represents the expected performance of this heat sink on a dual-core socket F (1207) processor. Based Thermal Design of Custom 2U-4P Systems Chapter 5 32800 Rev. 3.02 August 2006 Ther

15 RSVD Reserved. 14:8 VID_FF_ THRESH Video FIFO Threshold. Watermark level for setting the video FIFO threshold. This value also determines when the secondary priority is used during a write request. If the FIFO WORD count exceeds this value, the secondary priority ID is used. An INT or SMI can also be generated if this threshold is exceeded. Threshold value. 0-127 Linear mode: Y buffer depth is 192 QWORDs. Planar mode: Y,U,V buffer depths are all 64 QWORDs 7:5 SYNC_TO_PIN Sync Select. Selects

OUTSB 6E Output the byte in DS:rSI to the port specified in DX, and then increment or decrement rSI. OUTSW 6F Output the word in DS:rSI to the port specified in DX, and then increment or decrement rSI. OUTSD 6F Output the doubleword in DS:rSI to the port specified in DX, and then increment or decrement rSI. POP reg/mem16 8F /0 Pop the top of the stack into a 16- bit register or memory location. POP reg/mem32 8F /0 Pop the top of the stack into a 32- bit register or memory location. POP reg/mem64