Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
The remote control will operate the VOH703, Audiovox Televisions and Video Cassette Players. It is not a universal remote control and will not control equipment from other manufacturers. If a universal remote control is to be used with the VOH703, choose the remote encoding scheme for Audiovox Televisions when programming the remote. REMOTE CONTROL OPERATION TV/VIDEO MUTE CH VOL 5 6 8 9 PICTURE 2 3 CH WRITE ERASE/ AUTO PROGRAM PAUSE PLAY STOP 1-- SELECT VOL 4 7 1 SKIP/ SEARCH REW 0 FFWD R 1 2 9 11 10 12 14 7 6 3 4 8 5 13 16 15 REPLAY MEMORY Remote Controlled TV/Monitor Functions 1. POWER ON/OFFPress this button to turn the VOH703 On. The channel number or current video source will be displayed on screen and the picture will appear in a few seconds. Press the button again to turn the VOH703 Off. 2. DIRECT ACCESS (O-9) BUTTONSUse these buttons to make a direct channel selection. The channel number chosen will be displayed on the screen for about 4 seconds. The direct access is carried out with 0-9 keys (0-69ch). 3. CHANNEL UP/DOWN BUTTONSUse these buttons to advance to the next higher or lower channel. See also: SKIP / SEARCH BUTTON. 4. VOLUME UP/DOWN BUTTONSUse these buttons to increase or decrease the volume level of the headphone jacks or external speaker if installed. They are also used to make picture adjustments in picture select mode. Note: These buttons will not affect the volume of wired RF modulator. 5. PICTURE SELECT BUTTON Each time this button is pressed, the on screen picture adjustment display cycles through “adjustment bars” for CONTRAST, BRIGHTNESS, COLOR and TINT. Once the desired adjustment bar is displayed, use the VOLUME UP/DOWN buttons to adjust the setting. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is depressed. 6. MUTE BUTTON Press this button to remove the sound at the headphone stations. The screen will display the volume adjustment bar for 6 seconds, indicating that the sound has been turned off. Pressing the button again restores sound to the previously set level. The mute feature may also be released by pressing the VOLUME UP/DOWN BUTTONS. 7. TV/VIDEO BUTTON Any video equipment connected to the AUDIO/ VIDEO inputs can be viewed with the TV by pressing this button. Each time the button is pressed, the Audio / Video source will change in the following sequence VIDEO 1, VIDEO 2 and TV. 8. AUTO MEMORY BUTTON When the AUTO MEMORY button is pressed, all channels in TV or CATV mode are searched and tuned; all the channels with signals detected are automatically stored. Please refer to page 2 for more information on TV reception. -7 128-6423 7 of 16 9. SKIP/SEARCH BUTTONThis button selects between SKIP and SEARCH mode. In “SKIP mode” the TV only stops on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When the SKIP mode is off, the TV will stop on all active channels. 10. ERASE/WRITE BUTTONWhen tuned to a channel press this button to store or erase the channel from memory. The stored channel numbers are displayed in “GREEN” on the screen and the non-stored channel numbers are in “RED”. When the skip mode is on, the VOH703 will tune to only the stored channels when using the CHANNEL UP/DOWN buttons. Remote Controlled VCP Functions These features can only be used with an AudiovoxVideo Cassette Player, if this option was installed withyour video package. 11. POWER BUTTON This button is used to turn the VCP on and off. 12. “REW” REWIND BUTTON If this button is pushed while the tape is stopped, the tape will rewind. If this button is pushed whilethe tape is playing, the VCP will go into rewindsearch mode. For more information consult the Audiovox VCP Owner’s Manual. -8 13. PLAY BUTTON Press this button to activate play mode while atape is loaded into the VCP. This button may alsobe used to disengage search and pause modes. For more information, consult the VCP owner’s manual. 14. “F.FWD.” FAST FORWARD BUTTON If this button is pushed while the tape is stopped, tape will fast forward. If this button is pushed whilethe tape is playing, the VCP will go into fast forwardsearch mode. For more information on the search feature of the VCP, consult the VCP owner’s manual. 15. REPLAY BUTTON Pressing this button will rewind tape andimmediately begin playback when the tape is fully rewound. 16. STOP BUTTON Press this button to stop the tape. 128-6423 8 of 16 CHANNEL SET UP In order to easily access all available TV channels, it may be necessary to perform channel auto- programming whenever the vehicle’s geographic location has changed, i.e. city to city, weak signal area. 1. Press the AUTO MEMORY button on the Remote Control Unit or the AUTO PROGRAM button on the drop down video unit. You will see the TV cycle through all its channels. The built-in microprocessor will automatically note each channel that is actively broadcasting in your area. 2. (A) To tune only strong clear channels with the CHANNEL UP/D...
Dieses Handbuch ist für folgende Modelle:Monitore - VOH703 (492.3 kb)