Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Jura Capresso Dateigröße: 291.2 kb Dateiname: inst_ena.pdf Unterrichtssprache:

ENA 5 only: When using two cups, make sure the coffee spout is turned to the 2-cup position (Fig. 10). 9d. OVERRIDING CUP SIZE AND COFFEE STRENGTH If you want to brew a different cup of coffee just once you can override the propgrammed strength and volume before brewing. This is convenient when you desire a stronger or milder cup of coffee or a guest wants the coffee prepared differently. • Turn the Rotary Dial. It will show you the following options: MILD, NORMAL, STRONG, STEAM, 2 CUPS. If you do not select any of these options, the display will return to READY after approx. 7 seconds. Example: To prepare a STRONG. 2 OZ espresso. READY. • Turn the Rotary Dial to STRONG and push the Rotary Dial. The display shows STRONG and starts grinding. 1 CUP. • When the area around the Rotary Dial lights up in red, turn the dial and select 2.0 OZ. The display changes from 2.0 OZ to 1 CUP and the ENA will brew 2 oz. of coffee. READY. The next time you push the Rotary Dial, the ENA will brew according to the pre-programmed setting. Please note: When you select the 2 CUP setting (chapter 9c.) you can only override the cup size by turning the dial during brewing. The size shown is always per cup (e.g. if you choose 3 oz., the ENA will brew a total of 6 oz.). 10. USING PRE-GROUND COFFEE You can also use pre-ground coffee, bypassing the grinder. This is convenient if someone requests decaf, or flavored coffee. Important: • Never add more than two level measuring spoons of pre- ground coffee. • Never fill the funnel with instant coffee. • If the pre-ground coffee is ground too fine, it can block the system. No or very little coffee will come through the coffee spouts. • If you fill less than 1/2 a measuring spoon of coffee into the funnel the display will show NOT ENOUGH PRE-GROUND and the ENA will stop the operation and return to READY. 15. READY 12. CAPPUCCINO AND LATTE • Place one or two cups under the coffee spouts. Frothing milk for Cappuccino: Injecting hot steam into the milk • Move the small lever to the front to open the chute and insert to warm the milk and create a frothy layer of tiny bubbles. the coffee funnel (Fig. 14). The display shows FILL PRE-Steaming milk for Latte: Injecting hot steam to warm the milk GROUND. without creating a frothy layer. • Add one or two scoops of pre-ground coffee, remove the The ENA 5 is equipped with two different frothing/steaming systems: funnel and close the chute. The display shows 1 CUP *. • The frothXpress system - mounted on the machine (Fig. 3) • Press the Rotary Dial. The ENA will tamp and brew the coffee. • The Dual Frother PLUS – packaged separately During brewing you can change the cup size by turning the Rotary Dial. 1 CUP. READY. The ENA 3 and ENA 4 are equipped with the Dual Frother PLUS – mounted on the machine (Fig. 1, 10). The frothXpress system * At this point you can also choose 2 CUPS by turning the is separately available (see mail order form). Rotary Dial and then press the Dial to start. Please remember Recommendation: the ENA will now brew twice the programmed cup size. • If you froth for only one or two cups and want 100% control Please note: After use of sugar coated or flavored coffee over the frothing/steaming process, the Dual Frother PLUS through the pre-ground coffee funnel you may experience some might be the preferred equipment. flavor transfer when switching back to your regular coffee. • If you always want the same amount of milk and milk froth in Perform one or two extra RINSING cycles (see chapter 18.5).. your cup or you make multiple cappuccinos or lattes the 11. USING HOT WATER frothXpress is faster and more convenient to use. With the Caution: Hot water might cause scalding or burns! frothXpress you always produce the frothed milk right into your With this feature you can pre-warm your cup, make a cup of tea cappuccino or latte cup (Fig. 21). or soup or add hot water to your coffee to make it milder. Please note: READY • Always start with cold milk. • Place a cup underneath the frother. • When using regular milk (3% fat) the frothXpress system will • Turn the Selector Switch to the Hot Water/Steam position create a bit more froth than the Dual Frother. With the Dual (Fig. 5). WATER Hot water will push through the frother. frother you can create a denser froth than with the frothXpress. • When enough hot water is dispensed, turn the Selector Switch • Generally, skim milk will produce more froth than regular milk. back to the cup symbol READY. Skim milk lets you taste more coffee than regular milk. If you do not turn the Selector Switch back, the ENA will stop • With the Dual Frother you can inject more steam into the milk, pumping water after 16 oz. making the milk hotter, even bring it to a boil. 16. 12a. USING THE DUAL FROTHER PLUS IMPORTANT: ENA 3 and 4 only: The Dual Frother Plus is already attached. When you are finished with frothing/steaming turn the Selector ENA 5 only: Remove the frothXpress (Fig. 20), and attach the Switch back to th...

Herunterladen

Geben Sie zwei Ziffern: