This safety feature uses a water level sensor to stop the nebulizer once the water level sinks below the required level in the water basin. A small orange light will appear to indicate that the humidifier has automatically turned off. Turn the humidifier off and unplug before removing and refilling the water tank. HOW TO REMOVE AND ATTACH MIST CHANNEL 1. To remove mist chamber, slide mist chamber latch to left. Lift mist chamber off of the water basin. 2. To attach the mist chamber slide mist

POLARIZED PLUG This appliance has a polarized plug (one blade is wider than the other). As a safety feature to reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. SAFETY WARNING Although your appliance is easy to operate, for your safety, the below warnings must be followed: 1. Do

DO NOT IMMERSE WATER BASIN IN WATER. 3. Wipe all exteriors surfaces of the base with a soft, dry cloth. Do not immerse the base in water or use water to clean the base. An electric shock may result or the humidifier may be damaged. NOTE: It is recommended to clean humidifier with water and bleach solution as stated above after using the humidifier the fourth time. GENERAL MAINTENANCE AND CLEANING Before any cleaning operation, switch the humidifier off and unplug it. 1. Always unplug the unit be

8. Use the humidity output regulator control knob to adjust the intensity of the vapor output. Turning the knob clockwise will increase the moisture output, turning the knob counterclockwise with reduce the moisture output. (see Fig. 10) Fig. 10 9. When the humidifier runs out of water the power light will turn red, and the mist output will stop. This is a safety feature to prevent the humidifier from possibly over heating and damaging the nebulizer. This safety feature uses a water level sensor

& Fig. 2 (Top of Water Tank) 4. Mist Outlet Channel 5. Water Tank Handle Fig. 2 Fig. 3 (Water Basin) 3. Indicator Light 6. Nebulizer 7. Mist Chamber 8. Fan Vent 9. Valve Opener 10. Water Level Sensor 6\ 7 1# ^-9 3—-► . Fig. 3 Fig. 4 (Bottom of Water Tank) 11.Water Tank Valve 12. Water Tank Cap 13. Mist Outlet Channel 12 13s- « i ( O-—il Fig. 4 Fig. 5 (Water Tank Lid) 14. Water Tank Lid 15. Mist Output Slot Fig. 5 4 TECHNICAL SPECIFICATIONS: Rating Voltage 120V Frequency 60Hz Power 38W

Add 2 Tablespoons of white vinegar. Shake vigorously and allow to sit for 20 minutes. Shake vigorously again and empty the water. Rinse water tank a few times to get rid of the vinegar smell. 4. Make same white vinegar water solution. Pour into water basin. Let sit for 20 minutes then empty. Rinse with only water a few times to remove any vinegar smell. Wipe with a clean soft cloth. Wipe dry. 5. Wipe the exterior surface water tank and water basin with a soft, dry cloth. NEVER IMMERSE WATER B

Please note that the Indicator Light will stay on. The light indicates that the humidifier has power and is turned on. OPTIONAL HUMIDIFIER FILTER (Filters are not included with the humidifier and can be purchased separately from Crane USA.) A humidifier filter is an optional accessory for your Crane Cool Mist Humidifier. Filters are used to reduce white dust caused by hard water. Soak humidifier filter in water for 30 minutes to activate performance. Place humidifier filter inside Water Basin

2 General Safety Instructions P.3 List of Main Parts P.4 Tech. Specifications, Contents of Packaging P.5 Operation and Use P.5-8 Maintenance P.8-9 Trouble Shooting P.9 Service Center Information P.lO Warranty Information P.ll Warranty Card P. 12 Order Form P. 13 1 A Thank you for purchasing our CRANE Ultrasonic Humidifier. Each unit has been manufactured to ensure safety and reliability. Before using the humidifier for the first time, please read the instructions carefully, and keep

CALL US FOR PROBLEMS AND QUESTIONS. WE CAN HELP. If you experience unsatisfactory operation, first refer to the troubleshooting section in manual to ensure that it is not due to care of cleaning. Follow Care and Cleaning Instructions. You can also visit customer service. If you have any questions or comments please call our Crane Service Center 1-888-599-0992 or e-mail Crane Customer Service Center, customer-service@crane-usa.com. Please specify style and model number. Our Customer Service Rep

Specifications, Contents of Packaging P.4 Before First Use, How to Assemble, How to Operate P.5 Maintenance, Service Center P.6 Warranty Information PN Warranty Card P.8 1 A IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should also be observed, including the following. PLEASE READ AND SAVE ALL INSTRUCTION BEFORE USING THE TOWER FAN. 1. Always turn the fan off before removing the plug from the outlet. NEVER PLUG OR UNPLUG UNIT WITH WET HANDS.