If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: A Reorient or relocate the receiving antenna. A Increase the separation between the equipment and receiver. A Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. A Consult the dealer or an experienced ra

• Make sure you have the required computer and software. See “What You Need to Get Started” on page 5. • Your iPod may need to be reset (see page 49). • Check the cable connections. Unplug the cable at both ends and make sure no foreign objects are in the FireWire or USB ports. Then plug the cable back in securely. Use only Apple iPod cables. Be sure the connectors on the cables are oriented correctly. They can only be inserted one way. • If you’re connecting iPod to a portable or laptop compute

Recording begins and the Record button changes to a Stop button. 7 Click Stop when you’ve recorded as much as you want. Important If you don’t click the Stop button, recording continues until the hard disk is full. A dialog box appears, in which you can specify a name and location for your movie. You can also preview the QuickTime movie before you save it. Use as small a size as you can: The amount of disk storage that a movie takes is directly related to the size of the video window—the larger

The information in this update applies to you whether your manual is the Apple TV/Video System User’s Guide or the Apple Video System User’s Guide. What you should have In addition to the items shown in your manual in the section “What You Should Have,” in Chapter 1, look for the metal grounding clip for the video input card (as shown below). Grounding clip Note: The grounding clip may be attached to the video input card, or it may be a separate piece in your package. Installing the video input

You can also use the included cable to sync iPod or iPhone with your computer. To charge your iPod or iPhone: 1 Connect the USB cable to the power adapter, and then plug the power adapter into a power outlet. 2 Connect iPod or iPhone to the other end of the cable. You can also connect the cable to an iPod or iPhone dock. To charge and sync iPod or iPhone with your computer: ■ Connect iPod or iPhone to your computer using the USB cable. 3 Safety Information WARNING: Failure to follow thes

To end your workout: m iPod nano: Press the Play/Pause (’) button to pause your workout. Then press the Menu button and choose End Workout. m iPhone 3G S and iPod touch: Tap End Workout. If the device is locked, press the Home button and tap Pause. Then drag the slider and tap End Workout. Your most recent workout data is stored for future reference. Step 9: Track your progress at nikeplus.com. At nikeplus.com you can track your progress over time, view a record of all of your past workouts, set

AA If your mouse isn’t paired with a Mac, the light blinks, indicating your mouse is in discovery mode and ready to pair (pairing means your mouse and Mac are wirelessly connected to each other and ready to communicate). AAIf you don’t pair your mouse with your Mac within 3 minutes, the light and mouse turn off to preserve battery life. Slide the On/off switch on the bottom of your mouse to turn it on again, allowing you to pair it with your Mac. AAWhen your mouse is on and paired, with the batt

Failure to follow these instructions could result in damage to your equipment and may void your warranty. Replacing the battery requires five basic steps: • Turn off the computer. • Remove the computer core from the enclosure. • Remove the installed battery. • Install the replacement battery. • Replace the computer core in the enclosure. Note: A video version of the replacement instructions is available at Tools Required No tools are required for this procedure. Electrostatic Discharge (ESD) Sta

Failure to follow these instructions could damage your equipment and void its warranty. Note: Written and video instructions covering customer-installable parts are available at Warning: During this procedure, keep small parts away from children. Tools Required The only tool required for this procedure is a Phillips screwdriver. Opening the Computer Warning: Always turn off your computer before opening it to avoid damaging its internal components. 1. Place your computer on a clean, flat s