. The "Rep-1" indicator lights. . To cancel the one-track repeat mode, press the REPEAT button four times. To Display Text (SACD CD only) With SACDs that contain text information, the text information included on the disc can be displayed while in either the stop or play mode. 1. Press the TEXT DISPLAY button while in the stop mode. . The album title scrolls on the display. 2. Then press the PLAY button. . The title of the track currently playing scrolls on the display. . When a track is switche

The SLP 05 employs a fully balanced circuit topology, from input-to-output, that actively cancels external electrical and radio frequency noise picked up by audio cables. The sonic result is a greatly improved signal-to-noise level ratio with palpable, three-dimensional images of instruments and vocalists in a natural acoustic space. Balanced operation also ensures more than adequate output voltage to drive any balanced amplifier throughout the entire audio range with the all-too-rare combinatio

This will help protect the unit from lightning and power line surge damage. 13. POWER LINES: Do not locate an outside antenna system in the vicinity of overhead power lines or other electric light or power circuits. When installing an outside antenna system, take extreme care to avoid touching the power lines or circuits; contact with them could be fatal. 14. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this increases the risk of fire or elec

Turn on your TV and make sure that it is set to the correct input for the DVD 7. The front panel POWER button switches the player ON and OFF. When the player is OFF, it can only be turned back on using the front panel button or the ON button on the remote control. When the player is ON, you can put it into STANDBY using the POWER button on the remote control handset or the front panel button. USING THE ON-SCREEN DISPLAYS For ease of use, this player makes extensive use of graphical on-screen

Burn in is possible with some video displays in this setting. Screen saver ON is recommended. 21 CHANGING THE DEFAULT SETTINGS WALL PAPER Use this to select the image to be shown on the screen in the stop mode and CD play mode. BLUE Select this to display a blue background on the TV display. BLACK Select this to display a black background on the TV display. PICTURE (Factory default) Select this to display the wallpaper of the Cary Audio Design logo on the TV display. VFD BRIGHT Use t

21. STATION CALL: These buttons are used to preset the desired broadcasting stations. 22. TUNER SEEK (UP/DOWN): Up: Performs tuning in ascending frequency order. Down: Performs turning in descending frequency order. 23. POWER ON: Press this button to turn the Cinema 11a ON. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 AUTO SETUP HDAM HDFM FM AM FM MODE TEXT DISPLAY POWER OFF POWER ON TUNER SEEK TUNER SCAN MEMORY BRIGHT EQ ENTER SETUP LATE INPUT SELECTOR 7.1 IN HDMI 1 HDMI 2 INPUT

Also included in this manual are guidelines on how to service and care for your new Cary Audio Design product. TABLE OF CONTENTS Important Safety Instructions .............................................................. 2 Welcome Thank You ................................................................................................... 5 Product Features .......................................................................................... 5 Unpacking and Installation ...................

The default that most devices use/accept is: Baud Rate - 9600 Data Bits - 8 Parity - None Stop Bits - 1 Com Port Pin Configuration: Use standard pin configuration. A configuration that allows direct connection to a PC via 9-pin straight through serial cable is best. Use of only 3 pins(Transmit, Receive, Ground)is best. 9 pin female D connector Pin 2 = Transmit Pin 3 = Receive Pin 5 = Ground RS-232 interface : Commands are to be sent to the unit via RS-232 using the following format:

Also included in this manual are guidelines on how to service and care for your new Cary Audio Design product. TABLE OF CONTENTS Important Safety Instructions ......................................................... 2 Welcome Thank You .............................................................................................. 5 Product Features .................................................................................... 6 Unpacking and Installation ...................................

If they are different, wire the XLR cable so that the appropriate input pin connects to the equivalent input pin. Pin 1: Signal ground Pin 2: Signal + (non-inverting) Pin 3: Signal - (inverting) Connector ground lug: chassis ground Refer to your digital source's operating manual to verify that the XLR pin assignments of its input connectors correspond to the CD 306 SACD. If they are different, wire the XLR cable so that the appropriate output pin connects to the equivalent output pin. 12 CONTROL