Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Turn on your TV and make sure that it is set to the correct input for the DVD 7. The front panel POWER button switches the player ON and OFF. When the player is OFF, it can only be turned back on using the front panel button or the ON button on the remote control. When the player is ON, you can put it into STANDBY using the POWER button on the remote control handset or the front panel button. USING THE ON-SCREEN DISPLAYS For ease of use, this player makes extensive use of graphical on-screen displays (OSDs). Familiarize yourself with the way these work as you'll need to use them when setting up the player, or when using some of the playback features and making more advanced settings for audio and video. The screens are navigated in a similar way, using the cursor buttons to change the highlighted item and pressing ENTER to select it. CHANGING SETTINGS TO MATCH YOUR TV Using the SETUP menu, you can determine the settings that best fit your TV and system. Press the SETUP button. Use the UP^ , DOWN ▼ , LEFT i , and RIGHT ► cursors buttons to select the desired setting. 1. Select VIDEO SETUP. 2. Select TV DISPLAY. If you have a widescreen or 16x9 TV, select the Wide setting. Widescreen DVD software is shown using the full screen area. When playing software recorded in conventional (FS or full screen, 4x3) format, the settings on your TV will determine how the material is presented. See the manual that came with your TV for details on what options are available. If you have a conventional or 4x3 TV, select either NORMAL (Letter Box) or NORMAL (Pan & Scan). In Letter Box mode, widescreen software is shown with black bars at the top and bottom of the screen. Pan and Scan chops the sides off of widescreen material to make it fit the NORMAL screen (so even though the image looks larger on the screen, you're actually seeing less of the picture). Press ENTER to save the setting. 16 GETTING STARTED 3. Select "TV TYPE" The default setting of this player is MULTI and unless you notice that the picture is distorted when playing some discs, you should leave it set to MULTI. If you experience picture distortion with some discs, set the TV system to match your country or region's system. Unfortunately, this may restrict the kinds of disc you can watch. Once you have made your changes, the settings are retained until they are changed again, even when the power is turned OFF. Note: For some menus, the initial values can be changed during playback. 17 CHANGING THE DEFAULT SETTINGS CHOOSE THE SETUP MENU The SETUP menu allows you to make alterations to the video, audio, disc, progressive and AV Sync settings. Use the UP^, DOWN ▼ , LEFT i , and RIGHT ► cursors buttons to select the desired setting. Press ENTER to save changes in settings. Press the SETUP button and the following options appear: 1. VIDEO SETUP Use this to set the DVD 7 screen mode. (TV aspect and TV type) 2. AUDIO SETUP Use this to set the DVD 7 audio output mode. (Digital and LPCM output settings) 3. DISC SETUP Use this to set the language to be used when playing the disc. If the set language is not offered on that disc, the discs default language is set. 4. PROGRESSIVE SETUP Use this to set the Progressive Video Output mode, HDMI and RGBs Video Output mode. 5. DEFAULTS Use this to reset the factory defaults settings. 6. AV SYNC SETUP Use this to set the Audio & Video so they are synchronized in timing for the video and the audio signals. Some disks have incorrect timing and the video and the audio signals are slightly out of "synch" which is visible from careful viewing. VIDEO SETUP Choose Video Setup and press ENTER. Use the UP^, DOWN ▼, LEFT i , and RIGHT ► cursor buttons to navigate the options within Video Setup. When making changes, navigate to the desired selection and press ENTER. Press the LEFT i arrow to return to the list of options within Video Setup. To exit Video Setup, use the DOWN ▼ arrow to navigate to the bottom of the list making SETUP menu visible. Choose the SETUP button to return to the main SETUP menu. TV DISPLAY Use this to set the shape of your TV's screen. Normal / PS (for 4/3 shape screens) Select this to play wide DVDs in the pan and scan mode. (with sides of the picture cut off) Discs for which pan and scan is not specified are played in the Letter Box mode. 18 CHANGING THE DEFAULT SETTINGS Normal/LB (Factory default) (for 4/3 shape screens) Select this to play wide DVDs in the Letter Box mode. (with black strips at the top and bottom) Wide (for 16x9 shape screens) Select this to play wide DVDs in the full-screen mode. TV TYPE TV Type allows you to set your TV's video format. NTSC & PAL Video Standards There are differences in discs for the NTSC and the PAL TV systems. The MPEG video on a DVD disk is stored in a digital format. It is formatted for one of two mutually incompatible television systems, either as NTSC or as PAL/SECAM. Therefore, there are two kinds of DVDs available, either N...
Dieses Handbuch ist für folgende Modelle:DVD-Player - HD1080P (986.35 kb)