Before operating this set, please read these instructions carefully. 1 2 1 IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the 1) Read and understand all the instructions. 2) Follow all warnings and instructions marked on the product. 3) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for

Do not place mount in or near an air bag deployment zone or where it will obstruct view of the road. Step 1. Step 2. ! Screw the flexible steel shaft into the seat track bolt bracket. With a socket wrench, loosen the passenger seat track bolt, in- sert the seat track bolt bracket, and retighten the seat track bolt. Floor or Console Mounting For a more permanent mount, connect the Floor / Console Mount Bracket to the floor or console. This will require drilling into your vehicle’s interior surfac

your own OGM, it will be used when the answering machine answers the call. If your 4. Press

1 INSTALLING YOUR PHONE 1.1 1.2 1.3 If you have a Broadband Line If you connect your telephone to a line with a broadband connection, you will need to insert a micro-filter between the telephone and the telephone line, otherwise you may get interference between the telephone and the broadband, which could cause problems. In a home with broadband, every telephone must have a micro-filter connected, not just the one at the telephone point that your modem is connected to. If you need more broadband

PWR(POWER) Button – Press CALL button and hold to turn -Press to send the unit ON or Ringing tone to OFF. other PMR units. MENU Button -Press to change To switch between Modes. UP/DOWN Buttons – MIC (Microphone) Press to change channels, volume, and to select Speaker settings during programming. 1. LCD Screen Channel Number. Changes from 1 to 8 as selected by the user. CTCSS Code. Changes from 1 to 38 as selected by the user. Displays the Battery change level. When the bars are reduced, the batt

It is shown in hours, minutes and seconds format (HH:MM:SS). 4.2 Answer a Call If the handset is not on the base or a charging cradle: When the phone rings, press or to answer the call. If the handset is on the base or a charging cradle, and if AUTO ANSWER is set to ON: When the phone rings, pick up the handset to answer the call automatically, without having to press any button. 4.3 End a Call During a call connection, press to end the call. OR Put t

Do not connect the Symphony extension to a payphone. The ringer equivalence numbers (RENs) of all instruments (phones, fax machines, etc.) connected to an exchange line must not add up to more than 4 — otherwise, one or more of them may not ring answer calls correctly. The Symphony 2210 telephones have a REN of 1 unless marked 3 Read these notes first Before you install your Symphony 2210 — Choosing a site for the base unit telephone and charger pod The base unit and charger pod(s) should be pla

When the user of the other handset unit New call tone answers, you can talk on an intercom call. Contents of this User Guide Symphony 2200 Stylish Digital Cordless Telephone When both handsets are on an intercom call and an outside call comes in, you will 3 Press the HANG UP/C to transfer the call hear NEW CALL TONE over your conversation to tell you that someone is calling you. 1 Where to find it If the handset user does not answer: To answer the outside call and end the intercom call: . 2 Inst

1. Press

15 4.1.3 CALL FROM THE PHONEBOOK .............................................................................. 15 4.1.4 CALL FROM THE CALL LIST .................................................................................. 15 4.1.5 CALL FROM THE REDIAL LIST................................................................................ 15 4.1.6 CALL TIMER ........................................................................................................ 15 4.2 ANSWER A CALL ...........