b) the height of the framing will allow the mounting bracket to be secured to the framing within the dimensions shown. 2. After wall surface is finished, secure the mounting bracket to framing with (2) 4.8 x 38mm mounting screws. See chart below for mounting bracket location. HOOD DISTANCE ABOVE 36” HIGH COOK TOP (see note a) 28” MOUNTING BRACKET LOCATION ABOVE 36” HIGH COOK TOP 47-1/4” CEILING HEIGHT 8-FOOT 9-FOOT 22” 23” 24” 25” 26” 27” 41-1/4” 42-1/4” 43-1/4” 44-1/4” 10- FOOT (see note b) 45-

No. 5995392130) Product Registration Register your Product The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed and returned to the ELECTROLUX Canada. Thank you for choosing this appliance. The information contained within this Owner’s Guide will instruct you on how to properly operate and care for your range hood. Please read through the information contained in your literature pack to learn more about your new appliance. Record Your Model and Serial Numbers

Fig. 15. LOWER FLUE FIG. 14 UPPER FLUE UPPER FLUE VENTS EXPOSED LOWER FLUE UPPER FLUE VENTS CONCEALED 3.9x9.5mm MOUNTING SCREWS FIG.15 - 9 INSTALL FILTERS (DUCTED AND NON-DUCTED HOODS) 1. To remove the GREASE filter, push in on the metal latch tab and tilt filter downward to remove. 2. To install the GREASE filter, align rear filter tabs with slots in the hood. Depress the metal latch tab, push filter into position and release. Make sure filter is securely engaged after installation. NOTE: Prior

Refer to your local Moffat Service Force Centre. Always insist on genuine spare parts. 3 YOUR APPLIANCE OPERATING INSTRUCTIONS This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. To obtain the best performance it is advisable to switch on the hood a few minutes before you start cooking and leave it running for approximately 15 minutes after finishing. Cooker Hood Controls M. Fan Speed Control Position 0 - Off Position 1 - Low Position 2 - Normal

To enable you to use your appliance effectively and safely, please read this instruction book carefully before using the appliance and retain for future reference. If you require guidance in the use of the appliance or require further information on Moffat Products, please contact our Customer Care Department. For general enquiries concerning your Moffat appliance or for further information, visit our website at http:\\Customer Care Department Moffat 55 - 77 High Street Slough Berkshire SL1 1DZ

These hoods are specially conceived for combi steamers. The models detailed on this sheet are 4 hoods for 6 and 10 GN 1/1 and 10 GN 2/1 combi steamers, available in static or ventilated version. HOODS FOR COMBI STEAMERS ZANUSSI PROFESSIONAL FUNCTIONAL AND CONSTRUCTION FEATURES ♦ Built in AISI 304 stainless steel. ♦ Static models:they have to be connected through canalization to a remote extractor. ♦ On model with built-in fan, a built-in humidity sensor automatically activates the venti

These hoods are specially conceived for combi steamers. The models detailed on this sheet are 4 hoods for 6 and 10 GN 1/1 and 10 GN 2/1 combi steamers, available in static or ventilated version. HOODS FOR COMBI STEAMERS ZANUSSI PROFESSIONAL FUNCTIONAL AND CONSTRUCTION FEATURES ♦ Built in AISI 304 stainless steel. ♦ Static models:they have to be connected through canalization to a remote extractor. ♦ On model with built-in fan, a built-in humidity sensor automatically activates the venti

The particular deflector elements disposition forces the intake air to change direction several times. The air fattest particles bump against filter elements and deposit on their internal sides. The labyrinth filter is easy to remove, providing quick access to the descaling pipe. ♦ The advantages of the 304 AISI mechanical filters compared with the traditional wire filters are: - easy cleanibility in dishwashers thanks to their smooth surfaces - constant efficiency thanks to the never obstruc