Stimmen - 0, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
c/o Customer Service 20600 Nordhoff St Chatsworth, CA 91311 support@gefentv.com Notice Gefen Inc. reserves the right to make changes in the hard ware, packaging and any accompanying doc u men ta tion without prior written notice. Mini 1:8 Splitter for HDMI 1.3 is a trademark of Gefen Inc. © 2009 Gefen Inc., All Rights Reserved All trademarks are the property of their respective companies Rev A CONTENTS 1 Introduction 2 Operation Notes 3 Features 4 Panel Layout 5 Panel Descriptions 6 Connecting And Operating The Mini 1:8 Splitter For HDMI 1.3 7 EDID Management 9 Internal EDID Specifications 10 Automatic Deep Color Detection 11 Specifications 12 Warranty INTRODUCTION Congratulations on your purchase of the Mini 1:8 Splitter for HDMI 1.3. Your complete satisfaction is very important to us. Gefen TV Gefen TV is a unique product line catering to the growing needs for innovative home theater solutions. We specialize in total integration for your home theater, while also focusing on going above and beyond customer expectations to ensure you get the most from your hardware. We invite you to explore our distinct product line and hope you find your solutions. Don’t see what you are looking for here? Please call us so we can better assist you with your particular needs. The Gefen TV Mini 1:8 Splitter for HDMI 1.3 The Mini 1:8 Splitter for HDMI 1.3 is a compact and lightweight wall-mounted alternative to our rack-mounted HDMI 1.3 splitters. The Mini 1:8 Splitter for HDMI 1.3 sends one source of HDMI digital high definition audio/video to 8 HDMI-compliant displays at the same time. It supports all HDMI equipment such as DVD players, satellite set-top boxes, and all HDMI displays. Features include transmission of high-def, deep color video resolutions up to 1080p@60 Hz combined with advanced lossless digital audio formats for pristine sound reproduction. How It Works Connect your HDMI video source to the Mini 1:8 Splitter for HDMI 1.3’s input using the supplied HDMI cable. Connect up to 8 HDMI-compliant displays to the unit’s 8 HDMI outputs. Once connected and powered, the source signal will be seen on all eight displays at the same time. Note: This Splitter will attempt to identify and configure connected displays by capturing their EDID data (resolution/capability information that is unique to a particular display). If EDID data is unavailable, the Splitter can use a pre-programmed standard EDID that is compatible with most displays. A bank of 2 EDID function switches on the front panel allows selection of EDID type (internal or external) and 2-channel or multichannel audio. All displays that cannot show the same video resolution(s) as the Primary Display connected to Output #1 may fail to show a picture. Secondary displays follow the Primary by sharing the resolution and capability information (EDID) obtained from the Primary Display. 1 OPERATION NOTES READ THESE NOTES BEFORE INSTALLING OR OPERATING THE MINI 1:8 SPLITTER FOR HDMI 1.3 • The Mini 1:8 Splitter for HDMI 1.3 features EDID selection that may impact the resolutions/features that are available for use. Please see the EDID Mode section on page 6 for more information on the usage of this feature. • HDMI 1.3 Features: 225 MHz (up to 12 bit YUV 444 @ 1080p) Deep Color (XV Color) Dolby TrueHD & DTS-HD Master Audio Color Space Conversion CEC Pass Through and xvYCC Lip-Sync Pass Through • The Mini 1:8 Splitter for HDMI 1.3 features an automatic Deep Color detection function that will determine if all connected devices/displays are Deep Color capable. If a single connected device/display is not capable of Deep Color, this feature will not be available for use. This automatic detection cannot be disabled. 2 FEATURES Features • Simultaneously displays a single HDMI 1.3 source on up to 8 HDMI- compliant monitors without signal loss • Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p@60 Hz • EDID Detection/Adjustment for rapid integration of source and displays • Supports LPCM 7.1 audio, Dolby Digital Plus, Dolby TrueHD, and DTS-HD Master Audio • Supports DVI source and DVI displays using HDMI-to-DVI converter cable • HDCP keysets allow each output to work independently when connecting to a display • HDMI input/output cables may be up to 10/15 meters with 1080p/8-bit resolution • HDMI input/output cables may be up to 6/10 meters with 1080p/12-bit resolution • HDMI and HDCP compliant Package Includes (1) Mini 1:8 Splitter for HDMI 1.3 (1) 6- foot Locking HDMI cable (1) 5V DC Power Supply (1) User’s Manual 3 PANEL LAYOUT 12 3 4 5 6 6 4 PANEL DESCRIPTIONS 1 HDMI Outputs 1-4 Connect an HDMI capable device to any of these output ports. The device attached to output port 1 will be used to read EDID when the EXTERNAL EDID mode is selected. NOTE: All devices connected to any of the output ports must be capable of accepting at least one resolution listed in the EDID of the device connected to output port 1 when using the EXTERNAL EDID...