You may have to download drivers from Microsoft or the maker of your operating system. 2. In Windows XP, you can set the Jackbox to be the default audio output device and input device. To do this, open the “Sounds and Audio Devices” control panel. Click the “Audio” tab. Under “Sound Playback” select the device “C-Media USB Headphone Set”. Under “Sound recording” select the “C-Media USB Headphone Set” as the default device. Once this is complete, Step 2 continued click the “OK” button. You should

4-12 4.9.2 Advancement synchronized with ship’s speed ................................... 4-13 4.10 Display Colors .....................................4-14 4.11 Alarms .................................................4-15 4.11.1 Audio alarm on/off ....................... 4-15 4.11.2 Bottom alarm............................... 4-16 4.11.3 Fish alarm ................................. 4-16 4.11.4 Fish alarm (B/L)........................... 4-17 4.11.5 Water temperature alarm............. 4-17 4.11

HOW TO INSTALL THE SYSTEM.....................................................................................1-1 1.1 Display Unit ............................................................................................................... 1-1 1.2 Antenna Unit for MODEL1835 .................................................................................. 1-3 1.3 Antenna Unit for MODEL1935/1945 ......................................................................... 1-9 2. CABLE CONNECTION .

30 m. • The output from a funnel or exhaust vent decreases aerial performance and hot gases can damage the radiator. The antenna unit must not be installed where the temperature is more than 55° C. • The antenna unit can be installed on the bridge, a common mast, or the radar mast. (c) Radar mast(b) Common mast (a) On bridge Installation procedure Refer to the outline drawing at the back of this manual for the dimensions. Make five holes in the platform. Four holes to fasten the antenna unit and

Distances at which RF radiation levels of 100 and 10 W/m2 exist are given in the table below. Note: If the scanner unit is installed at a close distance in front of the wheel house, your administration may require halt of transmission within a certain sector of scanner revolution. This is possible—Ask your FURUNO representative or dealer to provide this feature. Stay away from transmitting scanner. The radar scanner emits microwave radiation which can be harmful to the human body, particularly t

The target appears "pushed" or "pulled" near the picture center. The range to objects are shown at wrong distances. (1) Target pulled (2) Correct (3) Target pushed outward Examples of wrong and correct sweep timings 1. Transmit on the shortest range, then adjust the gain and the A/C SEA. 2. Visibly select a target that creates a straight line (harbor wall, straight piers). 3. Open the Installation menu and select Timing Adjust. 4. Press the ENTER key to show the setting window. 5. Press • or ..

Navionics® is a trademark of Navionics®, registered in U.S. and other countries. Smart SensorTM is a trademark of AIRMAR, registered in U.S. and other countries. The future today with FURUNO's electronics technology. 9-52 Ashihara-cho, Nishinomiya City, Japan Phone: +81 (0)798 65-2111 Fax: +81 (0)798 65-4200, 66-4622 URL: Catalogue No. R-189a TRADEMARK REGISTERED MARCA REGISTRADA SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE FURUNO U.S.A., INC. Camas, Washington, U.S.A. FURUNO ESPANA S.A. Madr

MOUNTING..................................... 1-1 1.1 Antenna Unit.................................1-1 1.2 Monitor Unit..................................1-6 1.3 Control Unit................................1-10 1.4 Processor Unit............................1-15 2. WIRING........................................2-1 2.1 Interconnection.............................2-1 2.2 Antenna Unit.................................2-2 2.3 Monitor Unit..................................2-6 2.4 Processor Unit.........

Flat washer Cable gland Vinyl sheath Clamping gland Gasket Cut and trim armor. Connect each cable cores to the terminal board, referring to the interconnection diagram on next page. 15 14 13 12 11 10 98 76 5 4 3 21 RG12/UY RG-12/UY TTYCY-4 DPYCY-6 RW-9600 Connect inner conductors. M8 screw for grounding Clamp outer conductor of coaxial cables. Fix wires with cable-tie. 4. INSTALLING OPTIONAL EQUIPMENT Processor unit Junction box Antenna unit Junction box RED[B] GRN[B] WHT BRK GRN RED WHT[B] PPL[

Hi-Resolution 4.6" silver bright LCD display . Multiple steering modes - AUTO (Heading Control System), NAV (Track Control System), Advanced AUTO, AUTO Work, etc. . Simple operation - One touch Stand-by, Auto, Dodge and Nav controls . Heavy Duty Solenoid output for a variety of vessels and hydraulic pump combos . Precision XTE control (.001 nm) Magnetic North Heading Highway Auto Mode Set Course Cross Track Error The NavPilotTM 500 is a revolutionary autopilot designed for a variety of vessels.