To install the hand strap, 1. Using a sharp object such as a penknife, pry the round, adhesive covers from the back of the system to expose the screw bosses in the location that you want to install the hand strap. See Figure 1 for the screw boss locations. Figure 1. Hand Strap Fastening Points 2. Use the screws provided to attach the hand strap in the desired location as shown in Figure 2. 3. The hand strap is now attached to your system. Using the Hand Strap 4. If you are a right-handed u

When two battery packs are installed, the pack installed first is charged first. Caution UL Notice: FMW51BC1 / FMW51BC2 External Battery Charger This battery charger is compatible with the following battery packs: ¦ FMW51BP1 battery pack ¦ FMW29BP2 battery pack ¦ FMW29BP1 battery pack ¦ FMW43BP2 battery pack ¦ FPCBP48 battery pack 58-0581-01.fm Page 2 Tuesday, August 21, 2001 9:28 AM Using the Battery Charger To charge your battery pack(s) in the external battery charger: 1. Connect an FPC DC po

This prevents the battery pack from being overcharged. ¦ When you remove the battery pack from your pen tablet, always insert a charged battery pack in the pen tablet to replace the one that you removed, or apply DC power. ¦ The FMW51BP1, FMW29BP1, FMW29BP2, FMW43BP2 and FPCBP48 battery packs use lithium ion battery cells which have no “memory effect.” You do not need to completely discharge or “condition” the battery pack before charging. Battery Pack Charge Time The approximate maximum amount

The PenCentra 130 Docking Station is best suited for desktop computing tasks when a quick and temporary connection to peripheral computer equipment is needed and the pen tablet alone does not provide the necessary connectivity. The docking station provides the following interfaces for connection to peripheral computer equipment (see Figure 1 for locations): • Serial port This port allows you to connect an external device with a serial interface. Note: • The docking station serial port does not s

We strongly recommend that you read this guide before using the battery charger even if you are already familiar with computers. BATTERY CHARGER COMPONENTS Battery Battery Connector 1 Connector 2 Power Indicator LED Charge Indicator LEDs AC Adapter Connector Figure 1. Battery Charger Components Power Indicator LED The Power Indicator LED is on when power is being supplied from an AC adapter. 1 • Depending upon the configuration of your battery charger, it may or may not come with an AC Adapter.

Under the heading Activate sound for you will find a list of actions that are usually assigned acoustic signals. You can select yourself which applications or functions are to be accompanied by sounds. > Touch OK (navigation bar) to confirm your setting. A26391-K150-Z120-1-7619, Edition 3 Configuring the Pocket PC Adjusting menus Frequently used programs appear in the Start menu. You can adjust the Start menu to meet your needs. > Touch the Menus symbol under Start - Settings - Private. A list o

Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved. Contents Your Pocket LOOX... .......................................................................................................................... 1 Information before you start...........................................................................................

i In the default setting, a setting is activated that automatically switches the Pocket PC into the Suspend mode after three minutes when working without a power connection if no entries are made during this time. You can switch on the Pocket PC again at any time by briefly pressing the Suspend/Resume button and then continue working where you left off. A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Synchronising data with ActiveSync To also have the current version of the data you h

Unsaved data is lost. Shut down all programs before you reset the Pocket-PC. 12 > Simultaneously press the Suspend/Resume button (1) and the stylus tip (2) into the soft reset opening. A26391-K165-Z120-1-7619, edition 1 Operating the Pocket PC Resetting Pocket PC to delivered state 123 > Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application button (2). > Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the Suspend/Resume butto

any technical problems or other questions which you would like help with? Please contact: • our Hotline/Help Desk (see Help Desk List or the Internet: • your sales partner • your sales office Further information can be found in the "Safety" and "Warranty" manuals. The latest information on our products, tips, updates, etc., can be found on our website at: This manual was produced by Xerox Global Services. Published by Fujitsu Siemens Computers GmbH Edition: 1, July 2006 Order No.: A26391-K182-Z1