24,000 . 30,000 . 36,000 – 42,000 . 49,000 . 60,000 Btuh 840-170-38 TABLE OF CONTENTS Vert-I-Pak B-Series Vertical Air Conditioning System Page Safety Considerations ....................................................................................................... 3 General Recommendations ............................................................................................... 3 Unpacking and Inspecting the Unit ........................................................................

Post Office Box 1540 · San Antonio, Texas 78295-1540 4200 N. Pan Am Expressway · San Antonio, Texas 78218-5212 (210) 357-4400 · FAX (210) 357-4490 Printed in the U.S.A. Table of Contents Important Safety Information .............................................2 Introduction ........................................................................4 Vert-I-Pak Model Number Identification Guide ..................5 Serial Number Identification Guide ....................................5 2009 Models

DISASSEMBLY INSTRUCTIONS 2.1 MECHANICAL PARTS....................................5 2.1.1 FRONT GRILLE.....................................5 2.1.2 CABINET................................................5 2.1.3 CONTROL BOX.....................................5 2.2 AIR HANDLING PARTS..................................6 2.2.1 ORIFICE, HEATER ASSY AND TURBO FAN .........6 2.2.2 FAN........................................................6 2.2.3 SHROUD................................................7 2.

For your future convenience, record the model information here. 920-136-01 (01/03) Safety PrecautionsElectrical DataAbout the Controls onthe Air ConditionerFeatures and InstallationBefore you call for service... Safety PrecautionsElectrical DataAbout the Controls onthe Air ConditionerFeatures and InstallationBefore you call for service... Safety Precautions Safety Precautions .............3 About the Controls on the Air Conditioner Controls..............................6 Ventilation Control.....

Power failure. • Make sure the air conditioner plug is pushed completely into the outlet. • Check the house fuse/circuit breaker box and replace the fuse or reset the breaker. • If power failure occurs, turn the mode control to OFF. When power is restored, wait 3 minutes to restart the air conditioner to prevent tripping of the compressor overload. Air conditioner does not cool as it should Airflow is restricted. The THERMOSTAT may not be set high enough. The air filter is dirty. The room m

In case of questions regarding the provisions of this warranty, the English version will govern. Revised (10/00) 19 Memo 20 Guide d’installation & de fonctionnement Series murales 115 Volts UE08 US08 US10 US12 230 Volts US10 UE10 US12 UE12 NUMERO DU MODELE NUMERO DE SERIE DATE D’ACHAT Les informations sur le modele sont sur la plaque avant de l’unite. Pour enregistrer votre application, remplir et envoyez la carte d’enregistrement jointe par courrier ou enregistrez-vous en ligne a (US seulement.

Consult a qualified installer, service agency, or your distributor or dealer for information and assistance. The qualified installer or agency must use factory-authorized parts or accessories when modifying this product. Refer to the individual instructions packaged with the parts or accessories when installing. Follow all safety codes. Wear safety glasses and work gloves. Read these instructions thoroughly and follow all warnings or cautions attached to the unit. Always install units in accorda

Indoor air is not rejected (wasted) and vented outside. The room is cooled up to 40% faster with greater energy efficiency. SINGLE HOSE DESIGN BOTH INDOOR AIR AND REMOVED HEAT ARE EXHAUSTED Single hose design relies on air ‘leakage' from doors and windows to make up for air volume lost as indoor air is exhausted outside. The room takes longer to cool using more energy. Ideal for these applications • Workshops and garages • Bedrooms, attics and basements • Home offices • Sunrooms/ enclosed